Stalling Problem: Idle Stabilizer Check (VLK0049AP)

Publication date: 1970-01-01
Reference number: VLK0049AP

STALLING PROBLEM: IDLE STABILIZER CHECK

TECHNICAL INFORMATION TIP

Reference Number(s): VLK0049AP, Date of Issue:

VANAGON STALLING PROBLEM

YEAR(S): All

MANUFACTURER: Volkswagon

MODELS: Vanagon

ISSUE & TIP

A failed idle stabilizer may cause stalling at stops on Volkswagen Vanagon models equipped with A/C and automatic transmission. The electronic idle stabilizer advances timing 10 degrees with the A/C on.

Make sure the timing advances 10 degrees from the initial timing. If the timing remains at the factory setting, replace the idle stabilizer. Idle stabilizers are also known to cause ignition primary failure. Always check for vacuum leaks, tune-up specs, etc. before condemning the idle stabilizer.

Courtesy of Import Service Magazine with thanks to:

Thomas Ramies

Portola Valley Garage

Portola Valley, California

REFERENCE NUMBER

VLK0049AP

NOTE: This information has been obtained from sources generally believed to be reliable. Use your own judgment before relying on this data. Neither the suppliers of these Technical Information Tips, nor lemon-25 Repair Information Company, LLC, guarantees or assumes responsibility for data accuracy or completeness, nor is liability assumed by the suppliers of these Technical Information Tips or lemon-25 Repair Information Company, LLC, for any claims or damages resulting from the use of this information.