LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volkswagen >> 1990 >> Vanagon Base, Standard >> Repair and Diagnosis >> Engine Performance >> Engine Controls - Adjustments >> Ignition Timing >> VANAGON
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Ignition Timing: VANAGON

  1. Engine oil temperature must be 1760°F (80°C). Connect timing light and tachometer. Start engine and allow to idle. Check ignition timing at 800-1000 RPM.
    2. NOTE: Before checking engine timing, raise engine speed above 2100 RPM at least 4 times. This must be done each time ignition is turned off and restarted to clear ECU memory and by-pass hot-start, fast-idle function.
  2. If an adjustment is needed, turn ignition off and loosen distributor hold-down bolt just enough to move distributor by hand. Remove connectors from idle stabilizer by squeezing connectors then pulling apart. Plug idle stabilizer connectors together.
  3. Start and allow engine to idle. Turn distributor until notch on V-belt pulley matches separation in case. Set timing and RPM. Reconnect electrical connectors to idle stabilizer. Tighten distributor clamp bolt.
scientia non olet · About LEMON Manuals