Removal & Installation
WARNING: This page is about the Passat GLS, 4D Sedan, 1.8 A, Automatic, which is a different variant/trim than selected.
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| In-Line4,5 Spd Trans | 4.4 | 3.8 | C | |
| Combination Procedure: CLUTCH PILOT BEARING: Replace: | ||||
| 0.2 | C | |||
| Combination Procedure: CLUTCH PRESSURE PLATE &/OR DISC: Replace: | ||||
| 0.4 | C | |||
| Combination Procedure: CLUTCH RELEASE BEARING: Replace: | ||||
| 0.2 | C | |||
| Combination Procedure: FLYWHEEL: Remove & Install or Remove & Replace: | ||||
| 0.7 | C | |||
| Combination Procedure: TRANSMISSION ASSEMBLY: Replace: | ||||
| 0.4 | C | |||