Removal & Installation
WARNING: This page is about the Jetta GLS, 4D Sedan, 1.8 D, Automatic, which is a different variant/trim than selected.
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| Gas,In-Line4,5 Spd Trans | 4.5 | 3.4 | C | |
| Combination Procedure: CLUTCH PRESSURE PLATE &/OR DISC: Replace: | ||||
| 0.4 | C | |||
| Combination Procedure: CLUTCH RELEASE BEARING: Replace: | ||||
| w/o Slave Cylinder | 0.2 | C | ||
| w/Slave Cylinder | 0.3 | C | ||
| Combination Procedure: FLYWHEEL: Remove & Install or Remove & Replace: | ||||
| 0.7 | C | |||
| Combination Procedure: TRANSMISSION ASSEMBLY: Replace: | ||||
| 0.4 | C | |||