Transaxle Assembly: Remove, Install, and Overhaul
WARNING: This page is about the Jetta GL, 4D Sedan, 1.8 E, Automatic, which is a different variant/trim than selected.
Includes: Inspect and replace all necessary Transmission and Differential components and road test.| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| Gas,In-Line4 | 9.4 | A | ||
| Combination Procedure: CLUTCH PRESSURE PLATE &/OR DISC: Replace: | ||||
| 0.4 | C | |||
| Combination Procedure: CLUTCH RELEASE BEARING: Replace: | ||||
| w/o Slave Cylinder | 0.2 | C | ||
| w/Slave Cylinder | 0.3 | C | ||
| Combination Procedure: FLYWHEEL: Remove & Install or Remove & Replace: | ||||
| 0.7 | C | |||