LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volkswagen >> 2008 >> Golf Automatic >> Repair and Diagnosis >> General Information >> Computer Relearn Procedures >> Engine Control Module Programming >> Engine Control Module Coding >> Engine Control Module Coding
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Engine Control Module Coding

  1. Remove original ECM and install new ECM. Turn ignition on.
  2. On scan tool, press 0 and 1 buttons to select ADDRESS WORD 01: ENGINE ELECTRONICS. Press right arrow button. Press 0 and 7 buttons to select FUNCTION 07: CODE CONTROL MODULE. Press "Q" button to enter input. Enter appropriate code for vehicle. See appropriate ENGINE CONTROL MODULE CODING TABLE or VARIATION TABLE as follows.
  3. After coding ECM, press 0 and 6 buttons to select FUNCTION 06: END OUTPUT. Press "Q" button to enter input.
scientia non olet · About LEMON Manuals