Instrument Cluster: Notes

Malfunction recognition and malfunction display, refer to Malfunction Recognition and Malfunction Display:

Replacing the instrument cluster, refer to Replacing the Instrument Cluster:

Coding the instrument cluster, refer to Coding the Instrument Cluster:

Instrument cluster output diagnostic test mode, refer to Instrument Cluster Output Diagnostic Test Mode:

Resetting the service interval display, refer to Service Interval Display, Resetting .

NOTE:

Instrument cluster component functions can be checked On Board Diagnostic (OBD) program function "Output Diagnostic Test Mode (DTM)", refer to INSTRUMENT CLUSTER .

Additional information:

Refer to the Owner's Manual.

The following components are integrated in the instrument cluster:

Instrument Cluster Control Module -J285-.
Tachometer -G5-
Engine Coolant Temperature Gauge -G3-
Oil Level Thermal Sensor -G266-
Speedometer -G21-
Outside Air Temperature Sensor -G17-
Fuel Level Sensor 2 -G169-
Fuel Gauge -G1-
Fuel Level Sensor -G-
Indicator lamps, refer to OVERVIEW - INSTRUMENT CLUSTER

All warning and indicator lamps are equipped with Light Emitting Diodes (LEDs) which cannot be serviced or replaced separately. In the event of malfunctions, the entire instrument cluster must be replaced, refer to INSTRUMENT CLUSTER .