Removal & Installation
WARNING: This page is about the Passat S, 1.8L Eng VIN S, Automatic Trans, which is a different variant/trim than selected.
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| S,SE,In-Line4 | 8.2 | C | ||
| Combination Procedure: CLUTCH PILOT BEARING: Replace: | ||||
| S,SE,In-Line4 | 0.2 | C | ||
| Combination Procedure: CLUTCH PRESSURE PLATE &/OR DISC: Replace: | ||||
| S,SE,In-Line4 | 0.7 | C | ||
| Combination Procedure: CLUTCH RELEASE BEARING: Replace: | ||||
| S,SE,In-Line4 | 0.2 | C | ||
| Combination Procedure: FLYWHEEL: Remove & Install or Remove & Replace: | ||||
| S,SE,In-Line4 | 1.0 | C | ||
| Combination Procedure: TRANSMISSION ASSEMBLY: Replace: | ||||
| S,SE,In-Line4 | 0.4 | C | ||