Selector Lever Cable, Checking And Adjusting: Adjusting:

-- Move the selector lever into "P" position.

The adjusting screw -arrow- must be >>loosened<<.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Move the selector lever -2- on the transmission into "P" (push the gearshift lever toward the rear).

WARNING:

The parking lock must be engaged.

-- From >>underneath the vehicle<<, rotate both front wheels in the same direction and at the same time until the parking lock engages audibly.

The parking lock is engaged when it is not possible to rotate both front wheels in the same direction at the same time.

-- Lightly tap the handle on the selector lever back and forth but do not move it out of "P" under any circumstances.

This places the selector lever cable core in its optimal position.

-- Tighten the bolt -arrow-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

This ends the adjustment.

Tightening Specification