Engine Assembly: Remove, Install, and Overhaul

Includes: Replace Rings, Main and Rod Bearings, Camshaft(s), Crankshaft and Timing Components. Remove Cylinder ridge, burnish Cylinders, grind Valves and clean and test or replace Lifters. Includes (where applicable): Adjust Valves. DOES NOT include Pin fit or rebore and align Rods. See machine operations.

Applies To	Note	Standard Hours	Warranty Hours	Skill Level
Automatic DCT Trans, w/Front Differential Lock System		26.7		A
Automatic DCT Trans, w/o Front Differential Lock System		25.9		A
Combination Procedure: LEVEL CONTROL SYSTEM: Calibrate:
	With Use of Scan Tool.	0.3		B