Lane Change Assist Control Module: Remove & Replace
DOES NOT include diagnosis.| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| Both Sides,J1086/J1087 | DOES NOT include Calibration. | 0.8 | B | |
| One Side,J1086/J1087 | DOES NOT include Calibration. | 0.5 | B | |
| Combination Procedure: LANE CHANGE ASSIST SYSTEM: Calibrate: DOES NOT include wheel alignment (unless noted otherwise). | ||||
| Note: Calibration normally occurs automatically with replacement. Static calibration is only required when there is a DTC memory entry. Includes: Additional time for use of scan tool to perform this procedure. | 1.5 | B | ||