Windshield Projection Head Up Display Control Module -J898-, REMOVING AND INSTALLING: Removing

If the windshield projection control module is replaced, perform the test plan for replacing the windshield projection control module.

-- Perform the "Windshield projection head up display control module, replacing" function using the. Refer to DIAGNOSTIC ENTRIES .

Continuation

-- Remove the windshield. Refer to WINDSHIELD, REMOVING AND INSTALLING .

-- Remove the dynamic lighting strip. Refer to Dynamic Information Lighting Strip 3 -L385-, REMOVING AND INSTALLING .

-- Remove the windshield projection cover. Refer to INSTRUMENT PANEL DECORATIVE TRIM, REMOVING AND INSTALLING .

-- Move instrument panel noise insulation to the side.

-- Cover the windshield projection control module -1- with a soft cleaning cloth.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the bolts -arrows-.

-- Remove the windshield projection control module -1- until the connectors are accessible.

-- Disconnect the connectors.

-- Remove the windshield projection control module -1-.