Driver Information System Control Module with Display Unit -J1254-, REMOVING AND INSTALLING: Removing
If the driver information system display unit is replaced, perform the test plan for replacing the driver information system display.
-- Perform the function "driver information system display unit, replacing" using the. Refer to DIAGNOSTIC ENTRIES .
Continuation
-- Position the steering wheel as far back and down as possible. Use the entire adjustment range of the steering column adjustment for this.
-- Remove the gap cover for the instrument cluster. Refer to INSTRUMENT CLUSTER GAP COVER, REMOVING AND INSTALLING .
-- Unclip the trim -1- using a commercially available plastic wedge.
-- Disconnect the connector -2-.
-- Secure the driver information system display unit against falling out.
-- Remove the bolts -1-.
-- Remove the driver information system display unit.