Removal & Installation
WARNING: This page is about the Jetta R-Line, Automatic Trans, which is a different variant/trim than selected.
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| 1.4L Eng,Automatic Trans | Includes: Additional time for use of scan tool to perform this procedure. | 7.0 | C | |
| Combination Procedure: CONVERTER: Drain & Test: | ||||
| 1.4L Eng,Automatic Trans | 0.2 | C | ||
| Combination Procedure: CRANKSHAFT MAIN OIL SEAL: Remove & Replace: | ||||
| 1.4L Eng,Automatic Trans | 0.7 | B | ||
| Combination Procedure: FLYWHEEL: Remove & Replace: | ||||
| 1.4L Eng,Automatic Trans | 0.3 | C | ||
| Combination Procedure: LEVEL CONTROL SYSTEM: Calibrate: | ||||
| With Use of Scan Tool. | 0.3 | B | ||
| Combination Procedure: TORQUE CONVERTER: Remove & Replace: | ||||
| 1.4L Eng,Automatic Trans | 0.1 | C | ||
| Combination Procedure: TORQUE CONVERTER SEAL: Remove & Replace: | ||||
| 1.4L Eng,Automatic Trans | 0.2 | B | ||
| Combination Procedure: TRANSMISSION ASSEMBLY: Replace: | ||||
| 0.8 | C | |||