Compass Zone, Setting

1. Bring up the Main Menu 

-- Switch on the ignition.

An outline of a vehicle appears.

-- Press the button -1- in the windshield wiper lever one time.

-- To move back out of another menu into the main menu, hold the rocker switch -2- depressed for two seconds.

This procedure might have to be repeated until the main menu appears.

2. Bring up the Menu "Settings" 

-- Press the top or the bottom of the rocker switch to highlight a point on the menu.

The marked menu item is located between the two horizontal lines. There is also a small triangle on the right side.

-- Highlight "settings".

-- Press the button -1- in the windshield wiper lever.

The menu "Settings" is brought up.

3. Bring up the Menu "Comfort" 

-- Highlight "Comfort" with the rocker switch -2-.

The menu "Comfort" is brought up.

4. Bring up the Menu "Compass" 

-- Highlight "compass" with the rocker switch -2-.

The menu "Compass" is brought up.

The following will appear in "compass" :

1. Direction
2. Zone
3. Calibration
4. Back

5. Bring up the Menu "Zone" 

Select "zone" and press the button -1- to confirm.

The following will appear in "compass" :

1. Direction
2. The Zone (for Example Zone 8 for Germany, Zone 6 for Mexico)
3. (+1 Zone) the Ability to Set 1 Zone Higher
4. (-1 Zone) the Ability to Set 1 Zone Lower
5. Back

-- Highlight "+ 1 zone" or "- 1 zone" with the rocker switch. Press the button -1- to maximize or minimize the compass zone appearing in the display.

6. Exit the Menu 

-- Highlight "back" with the rocker switch -2-.

-- Press the button -1-.

The menu for "Compass" is exited and the last displayed menu is brought up.