Vehicle Delivery, Performing Service Work With Vehicle Diagnostic Tester

-- Perform the service work for vehicle delivery via menu item >>service work<< using the Vehicle Diagnostic Tester. Refer to VEHICLE DIAGNOSTIC TESTER, CONNECTING .

The program sequence >>Service work for vehicle delivery<< includes everything needed for vehicle delivery. Additional programs are not necessary.

Only if a single step was not completed successfully, it must be repeated. In this case the failed test is added to the test plan automatically.

-- Select the respective individual functions via the >>select individual check<< button, or via the tab >>special functions<<, in case part of the program was not completed properly.

The following functions are performed during service work for vehicle delivery:

Test description

• Battery Transport Mode, Deactivating
• OCU, Activating
• Service Values, Resetting
• Range Calculation, Resetting
• Battery Test, Performing
• Battery Adaption, Performing
• Emergency Battery Adaptation Values, Resetting
• OCU, Registering

Test description

• To start OCU operation the vehicle must be in range of mobile network and GPS.
• 12V charger disonnected from the vehicle