LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volkswagen >> 2025 >> ID.4 Standard >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Engine >> Electric Drive >> Service Work >> Maintenance Tables >> Pre-Delivery Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Pre-Delivery Inspection

Work to be completed
Diagnostic Procedures
-- Battery Transport Mode, Deactivating
-- 12V battery, check the battery charge.
  • This happens automatically for vehicles with a Battery Monitoring Control Module -367- when deactivating the transport mode.
-- 12V Battery, check with Battery Tester VAS 6161.
  • Only applies to vehicles without battery cooling module.
-- Service Interval Display, Resetting
-- DTC Memory, Reading Out for All Systems
Vehicle Interior
-- Front Passenger Airbag, Checking Key Switch and On/Off Function Control
-- Vehicle Interior, Checking for Cleanliness.
-- All Switches, Electrical Equipment, Sockets, Displays and Other Controls, Checking Function
-- Power Window Regulator, Performing Initialization (Activation)
-- Hour and Date, Adjusting
-- Two Clamps, Installing According to Installation Instructions
  • Only applies to Netherlands.
-- High-Voltage Battery, Checking Charge Level (Recommendation: Approximately 80% at Delivery to the Customer)
  • Only applies to BEV and PHEV
Vehicle Exterior
-- Vehicle Exterior, Checking for Cleanliness.
-- Wheel Bolts, Tightening to Specified Tightening Specification
-- Windshield Wiper Protectors, Removing
Vehicle from Below
-- Vehicle Underbody, Visually Inspecting for Damage
-- Brake System, Visually Inspecting for Leaks and Damage
-- Transportation Safeguard, Removing if Equipped
-- Vehicle for Leaks and Damage, Visually Inspecting from Below
Tires
-- Tire Pressure, Checking
Front Compartment
-- Coolant Level, Checking
-- Brake Fluid Level, Checking it is at Maximum
-- Brake Fluid, Changing on Vehicles Older than 12 Months
-- Windshield Wiper/Washer System and Headlamp Washer System, Checking Function and Adjustment
Final Procedures
-- 12V battery: check the battery terminal clamp for secure seating.
-- All Equipment Delivered with Vehicle, Installing (if applicable)
-- Tire Pressure Monitoring System, Calibrating to Tire Pressure Adjustment
-- Key, Checking Number, Function, and Cleanliness
-- Maintenance Schedule / Digital Maintenance Schedule: Entering Pre-Delivery Inspection.
-- Road Test, Performing
-- Charging Cable, Checking Presence and Condition
  • Only applies to BEV and PHEV
-- Charging Cable Case: Attaching in the Luggage Compartment
  • Only applies to ID.4 with subwoofer in the luggage compartment recess.