Power Window Regulators, Checking Position
After disconnecting and reconnecting the battery, the power window one-touch up/down function does not work. Before delivering a new vehicle, the window regulator must be repositioned. The vehicle battery must not be disconnected after positioning.
After disconnecting and reconnecting the battery, force limitation of the power window regulators will not function. This can cause serious injuries if, for example, fingers are caught in the window!
- Position the window regulators again.
Perform the following to position the power window regulator:
The following procedure description is for the left front window. The other window regulators are positioned the same way by pressing the respective switch in the driver door.
-- Switch the ignition on.
-- Close all doors and windows completely.
-- Pull the button for the window regulator upward and hold it for at least one second in this position.
-- Release the button and press it again and hold it pressed upward.
The one-touch up/down function is now ready to be used.
Restoring the position of the window regulator can be done separately or many at the same time.
-- Switch off the ignition.