All Other Models
- Turn ignition switch "OFF", and disconnect harness connector from control module. Set ohmmeter to x100 scale. Connect ohmmeter leads to terminals 7 and 31d of harness connector. See Figure. Measure pick-up coil resistance.
- If resistance readings are not to specifications, remove connector from distributor, and take reading at pick-up coil pins at distributor.
- If readings are still not to specifications, replace pick-up coil. If correct readings are obtained at distributor, but not at harness connector, replace harness.PICK-UP COIL RESISTANCE SPECIFICATIONS
Application Ohms BMW 520-700 Fiat 890-1285 Mercedes-Benz 500-700 Porsche 928 485-700 Volvo GLT Turbo 4-Cylinder 950-1250 GLE V6 540-660