2.3L: Intake Manifold Sharp Edge Cuts Wiring Harness (VOL0071AP)

Publication date: 1970-01-01
Reference number: VOL0071AP

2.3L: INTAKE MANIFOLD SHARP EDGE CUTS WIRING HARNESS

TECHNICAL INFORMATION TIP

Reference Number(s): VOL0071AP, Date of Issue:

VOLVO WIRE HARNESS TROUBLES

YEAR(S): 1984

MANUFACTURER: Volvo

MODELS: DL

ISSUE & TIP

On a 1984 Volvo DL 2.3 liter, look for a cut in the wiring harness caused by a sharp edge on the intake manifold as the harness passes through the opening between the number 3 and 4 cylinders.

The harness is tied to the manifold so that it is pulled up against this sharp edge in the casting. This may cause the temperature gauge to peg but other running problems can also occur because fuel injection wires are also in this harness.

Courtesy of Import Service Magazine with thanks to:

Michael Geragotelis

Storrs Automotive

Windham, Connecticut

REFERENCE NUMBER

VOL0071AP

NOTE: This information has been obtained from sources generally believed to be reliable. Use your own judgment before relying on this data. Neither the suppliers of these Technical Information Tips, nor lemon-25 Repair Information Company, LLC, guarantees or assumes responsibility for data accuracy or completeness, nor is liability assumed by the suppliers of these Technical Information Tips or lemon-25 Repair Information Company, LLC, for any claims or damages resulting from the use of this information.