LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volvo >> 1992 >> 240 GL, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Tests W/Codes >> Self-Diagnostics - Ignition System >> Fault Code Testing >> Code 2-1-4 (Impulse Sensor Signal)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Code 2-1-4 (Impulse Sensor Signal)

  1. Turn ignition off. Connect an ohmmeter between terminals No. 10 (Blue/Yellow wire on 240; Red or Blue wire on 740/940) and No. 23 (Yellow/Red wire on 240; Red or Blue wire on 740/940).
  2. Resistance should be 215-265 ohms. If engine is hot, resistance could reach 280-300 ohms. If resistance is not as specified, check wiring. If wiring is okay, check sensor. See CONTROL FUNCTION NO. 2 under SELF-DIAGNOSTICS - IGNITION SYSTEM  .
scientia non olet · About LEMON Manuals