LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volvo >> 1992 >> 240 GL, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Tests W/Codes >> Self-Diagnostics - Ignition System >> Fault Code Testing >> Code 2-3-4 (Throttle Switch Signal)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Code 2-3-4 (Throttle Switch Signal)

  1. Turn ignition off. Connect an ohmmeter between terminal No. 7 (Yellow/White wire on 240; Orange wire on 740/940) of ignition system ECU connector. Reading should be zero ohms.
  2. Press accelerator pedal slightly to open throttle switch. Reading should be infinite. If resistance is not as specified, check resistance at throttle switch. For throttle switch testing and adjustment, see SYSTEM/COMPONENT TESTS article in the ENGINE PERFORMANCE Section.