LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volvo >> 1992 >> 940 GL, AW70 >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System/Component Tests >> Fuel System >> Fuel Control >> Fuel Injectors (960)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fuel Injectors (960)

  1. Turn ignition off and remove fuse No. 24. Connect Measuring Unit (999-3070 ) between ECU and ECU connector. See Figure . Turn ignition on.
  2. Connect voltmeter between measuring unit terminals No. 17 and 24, and between terminals No. 16 and 24. In both cases, battery voltage should be present.
  3. Turn ignition off. Connect an ohmmeter between terminals No. 37 and 17. Resistance should be approximately 5.3 ohms. Connect ohmmeter between terminals No. 37 and 16. Resistance should be approximately 5.3 ohms.
  4. Disconnect injector connectors. Using an ohmmeter, check resistance of each injector. Resistance should be 16 ohms at 68°F (20°C). Replace as necessary.
scientia non olet · About LEMON Manuals