Selector switch: General
The cruise control selector switch is located on the turning indicator stalk. To activate cruise control vehicle speed must be above 35 km/h, the switch must be ON and the SET button must be pressed in.
When the system has been engaged vehicle speed can be adjusted up or down by pressing the + or - SET button. Every time the SET button is pressed the vehicle speed setting changes by 1.6 km/h (1 mph). If the control module is switched off (by pressing the brake/clutch pedals, the ON/OFF button or by moving the gear selector from D to N) that latest vehicle speed setting is stored in memory until the ignition is switched off. This vehicle speed can be restored by moving the ON/OFF button to the RESUME position.