Roll Over Protection System
- Description
- Operation
- Component Locations
- Functional Tests
- Symptom Diagnosis
- System Tests
- Self-Diagnostics
- Diagnostic Tests
- DTC ROP-412: Control Unit, Internal Fault
- DTC ROP-413: Transport Fuse
- DTC ROP-427: ROPS Warning Light, Faulty Signal
- DTC ROP-428: ROPS Warning Light, Signal Too High
- DTC ROP-429: Battery Voltage, Signal Low
- DTC ROP-430: Solenoid S1 & S2, Faulty Signal
- DTC ROP-431: Left Solenoid S1, Signal Too Low Or DTC ROP-441: Right Solenoid S2, Signal Too Low
- DTC ROP-432: Left Solenoid S1, No Signal Or DTC ROP-442: Right Solenoid S2, No Signal
- DTC ROP-433: Left Solenoid S1, Signal Too High Or DTC ROP-443: Right Solenoid S2, Signal Too High
- DTC ROP-451: Solenoid S1 & S2, Trigger Counter
- DTC ROP-452: Control Unit, Incorrect Operation
- Removal & Installation
- Wiring Diagrams