Checking for an open-circuit in the cable

Check cable between control module #23 and ignition switch terminal 15I for an open-circuit according to Open-circuit, permanent faults .

Fig 1: Identifying Ohmmeter

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 2: Checking For Open-Circuit

Courtesy of VOLVO CARS OF NORTH AMERICA.

Select "Continue" when the fault has been repaired. 

• Continue 

  Refer to Verification 

Check cable between control module #9 and battery for an open-circuit according to Open-circuit, permanent faults .

Fig 1: Identifying Ohmmeter

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 2: Checking For Open-Circuit

Courtesy of VOLVO CARS OF NORTH AMERICA.

Select "Continue" when the fault has been repaired. 

• Continue 

  Refer to Verification 

Check cable between data link connector (DLC) terminal 7 and transmission control module (TCM) #13 for an open-circuit according to Open-circuit, permanent faults .

Fig 1: Identifying Ohmmeter

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 2: Checking For Open-Circuit

Courtesy of VOLVO CARS OF NORTH AMERICA.

Select "Continue" when the fault has been repaired. 

• Continue 

  Refer to Verification