LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volvo >> 2000 >> S80 Base >> Repair and Diagnosis (Single Page) >> Engine Performance >> Remove, Overhaul & Install >> Engine Control - Removal, Overhaul & Installation >> Computerized Engine Controls >> Engine Control Module >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Engine Control Module: Installation

  1. Inspect pins and sockets of control module connectors before installing. If any are visibly damaged, control module must be replaced.
  2. Carefully place control module into its housing. Press module into grooves as far as it will go.
  3. Place Special Tool (999 5572) or equivalent puller around control module. Move upper section of puller as far forward as it will go. See Figure.
  4. Press cover of control module housing into place.
  5. Ensure correct positioning of air ducts around module housing.
scientia non olet · About LEMON Manuals