Brake Control System - Removal, Replacement And Installation

• Anti-Lock Brakes (1999-2000)
  • Control Module (ABS), Replacing
    • Preparation
      • Disconnect the battery lead
    • Preparations for replacement
      • Remove the air cleaner (ACL) housing
      • Remove the integrated relay/fusebox. Remove the connector for the ABS unit
    • Removal
      • Remove the control module
      • Check the control module
    • Installation
      • Install the control module on the ABS hydraulic modulator
  • Hydraulic unit, replacing
  • Ring gear (toothed wheel) front, change
• Anti-Lock Brakes (2001)
  • Control Module (ABS), Replacing
    • Preparation
      • Disconnect the battery lead
    • Preparations for replacement
      • Notes
      • Remove the air cleaner (ACL) housing
      • Remove the integrated relay/fusebox. Remove the connector for the ABS unit
    • Removal
      • Remove the control module
      • Check the control module
    • Installation
      • Install the control module on the ABS hydraulic modulator
    • Hydraulic unit, replacing
      • Preparation
      • Removal
      • Depressurize the brake system
      • Preparations for removal of the ABS hydraulic modulator
      • Remove the ABS hydraulic modulator with its bracket
      • Remove the ABS hydraulic modulator from the bracket
      • Checking the ABS hydraulic modulator
      • Installation
        • Check the control module
        • Assemble the ABS hydraulic modulator and the bracket
        • Install the integrated relay/fusebox
  • Hydraulic unit, replacing
  • Ring gear (toothed wheel) front, change
• Anti-Lock Brakes (2002-2005)
  • Brake control module (BCM), replacing
  • Hydraulic unit, replacing
  • Ring gear (toothed wheel) front, change
• Anti-Lock Brakes (2006)
  • Brake Control Module (BCM), Replacing
    • Removal
      • Preparation
      • Removing the air cleaner (ACL) housing
      • Removing the integrated relay/fusebox
      • Disconnecting the connector
      • Removing the control module
      • Checking the new control module
    • Installation
      • Installing the control module
      • Installing the battery lead
      • Loading software
      • Visual check
      • Function test
  • Hydraulic unit, replacing
    • Preparation
      • Disconnect the battery lead
    • Removal
      • Preparations
    • Depressurize the brake system
    • Preparations for removal of the ABS hydraulic modulator
    • Remove the ABS hydraulic modulator with its bracket
    • Remove the ABS hydraulic modulator from the bracket
    • Checking the ABS hydraulic modulator
    • Installation
      • Check the control module
      • Assemble the ABS hydraulic modulator and the bracket
      • Installing the ABS hydraulic modulator, continued
      • Install the integrated relay/fusebox and ABS unit connector
      • Finishing work
    • Function test