April 5, 2026: LEMON Manuals is launched! Read the announcement.

Cables And Fuses - General Information

Checking The Result Of The Crimping Operation (1999-2000)
- Examples of correct terminal crimping
- Examples Of Incorrect Crimping
Glossary (1999-2000)
- Glossary for connector/housings
- Terms used for cable terminals
Ground Points And Oxidation (1999-2000)
- Ground points and oxidation
Inserting A Cable Terminal In A Housing (1999-2000)
- Closing the housing
  - Keep in mind the following
  - After completing the repair work
- When cable terminal is to be inserted in a housing
  - Keep in mind the following
  - Proceed
Open The Connector (1999-2000)
Operating Procedures For Repairs (1999-2000)
- Proceed as follows
Replacing Cable Terminals (1999-2000)
- New cable terminal
- Seal SWS and plug
  - Seal SWS for cable terminals
  - Plug
Soldering, General (1999-2000)
- Soldering, general
Stripping A Cable (1999-2000)
- Cutting and checking a cable
  - Cutting a cable
  - Inspect the cable insulation
- Stripping the cable
  - Stripping the cable for a cable terminal
  - Length of the stripped section of cable
Terminal Crimping (1999-2000)
Cables (1999-2006)
- Cable terminals surface treatment
  - General information