Engine Control Module (ECM) Diagnostic Trouble Codes - 5 Of 11

• ECM-291D: Fuel Pump Control Module. Signal Too Low (B5254T2; 2005-2006)
  • Diagnostic trouble code (DTC) information ECM-291D
  • Signal too high/signal too low/signal missing
• ECM-291D: Fuel Pump Control Module. Signal Too Low (B6294S2; B6294T; 2005-2006)
  • Diagnostic trouble code (DTC) information ECM-291D
  • Signal too high/signal too low/signal missing
• ECM-2920: Heated Oxygen Sensor (Ho2S) Preheating, Bank 2. Faulty Signal. Intermittent Fault (B6294S2; B6294T; 2002)
  • Diagnostic trouble code (DTC) information
  • Faulty signal. Intermittent fault
• ECM-2920: Heated Oxygen Sensor (Ho2S) Preheating, Bank 2. Faulty Signal. Permanent Fault (B6294S2; B6294T; 2002)
  • Diagnostic trouble code (DTC) information
  • Faulty signal. Permanent fault
    • Replacing the component
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-2920: Heated Oxygen Sensor (Ho2S) Preheating, Bank 2. Signal Missing (B6294S2; B6294T; 2002)
  • Diagnostic trouble code (DTC) information
  • Signal missing
    • Checking the connector
    • Checking components and wiring
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-2920: Heated Oxygen Sensor (Ho2S) Preheating, Bank 2. Signal Too High (B6294S2; B6294T; 2002)
  • Diagnostic trouble code (DTC) information
  • Signal too high
    • Checking components and wiring
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-2920: Heated Oxygen Sensor (Ho2S) Preheating, Bank 2. Signal Too Low (B6294S2; B6294T; 2002)
  • Diagnostic trouble code (DTC) information
  • Signal too low
    • Checking components and wiring
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-2A00: Fuel Temperature Sensor. Faulty Signal (B5254T2; 2006)
  • Diagnostic trouble code (DTC) information ECM-2A00
  • Fault-tracing
    • Checking the status
    • Checking components and wiring
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-2A0A: Rear Heated Oxygen Sensor (Ho2S). Faulty Signal (B5254T2; 2004)
  • Diagnostic trouble code (DTC) information ECM-2A0A
  • Faulty signal
    • Checking components and wiring
      • Notes
      • Verification
    • Information
      • Fault-tracing information
• ECM-2A0A: Rear Heated Oxygen Sensor (Ho2S). Faulty Signal. Intermittent Fault (B6284T; 1999-2001)
  • Diagnostic trouble code (DTC) information
  • Faulty signal. Intermittent fault
    • Checking the wiring
    • Information
      • Fault-tracing information
• ECM-2A0A: Rear Heated Oxygen Sensor (Ho2S). Faulty Signal. Intermittent Fault (B6294S; 2000-2001)
  • Diagnostic trouble code (DTC) information
  • Faulty signal. Intermittent fault
• ECM-2A0A: Rear Heated Oxygen Sensor (Ho2S). Faulty Signal. Intermittent Fault (B6294S2; B6294T; 2002-2004)
  • Diagnostic trouble code (DTC) information
  • Faulty signal. Intermittent fault
• ECM-2A0A: Rear Heated Oxygen Sensor (Ho2S). Faulty Signal. Intermittent Fault (B6304S3; 1999)
  • Diagnostic trouble code (DTC) information
  • Faulty signal. Intermittent fault
• ECM-2A0A: Rear Heated Oxygen Sensor (Ho2S). Faulty Signal. Permanent Fault (B6284T; 1999-2001)
  • Diagnostic trouble code (DTC) information
  • Faulty signal. Permanent fault
    • Checking components and wiring
      • Notes
      • Verification
    • Information
      • Fault-tracing information
• ECM-2A0A: Rear Heated Oxygen Sensor (Ho2S). Faulty Signal. Permanent Fault (B6294S; 2000-2001)
  • Diagnostic trouble code (DTC) information
  • Faulty signal. Permanent fault
• ECM-2A0A: Rear Heated Oxygen Sensor (Ho2S). Faulty Signal. Permanent Fault (B6294S2; B6294T; 2002-2004)
  • Diagnostic trouble code (DTC) information
  • Faulty signal. Permanent fault
• ECM-2A0A: Rear Heated Oxygen Sensor (Ho2S). Faulty Signal. Permanent Fault (B6304S3; 1999)
  • Diagnostic trouble code (DTC) information
  • Faulty signal. Permanent fault
• ECM-2A0A: Rear Heated Oxygen Sensor (Ho2S). Signal Missing (B5254T2; 2004)
  • Diagnostic trouble code (DTC) information ECM-2A0A
  • Signal missing
    • Checking the connector
    • Checking components and wiring
      • Notes
      • Verification
    • Information
      • Fault-tracing information
• ECM-2A0A: Rear Heated Oxygen Sensor (Ho2S). Signal Missing. Intermittent Fault (B6284T; 1999-2001)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Intermittent fault
    • Checking wiring and connectors
    • Information
      • Fault-tracing information
• ECM-2A0A: Rear Heated Oxygen Sensor (Ho2S). Signal Missing. Intermittent Fault (B6294S; 2000-2001)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Intermittent fault
• ECM-2A0A: Rear Heated Oxygen Sensor (Ho2S). Signal Missing. Intermittent Fault (B6294S2; B6294T; 2002-2004)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Intermittent fault
• ECM-2A0A: Rear Heated Oxygen Sensor (Ho2S). Signal Missing. Intermittent Fault (B6304S3; 1999)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Intermittent fault
• ECM-2A0A: Rear Heated Oxygen Sensor (Ho2S). Signal Missing. Permanent Fault (B6284T; 1999-2001)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Permanent fault
    • Checking the connector
    • Checking components and wiring
      • Notes
      • Verification
    • Information
      • Fault-tracing information
• ECM-2A0A: Rear Heated Oxygen Sensor (Ho2S). Signal Missing. Permanent Fault (B6294S; 2000-2001)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Permanent fault
• ECM-2A0A: Rear Heated Oxygen Sensor (Ho2S). Signal Missing. Permanent Fault (B6294S2; B6294T; 2002-2004)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Permanent fault
• ECM-2A0A: Rear Heated Oxygen Sensor (Ho2S). Signal Missing. Permanent Fault (B6304S3; 1999)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Permanent fault
• ECM-2A0A: Rear Heated Oxygen Sensor (Ho2S). Signal Too High (B5254T2; 2004)
  • Diagnostic trouble code (DTC) information ECM-2A0A
  • Signal too high
    • Checking components and wiring
      • Notes
      • Verification
    • Information
      • Fault-tracing information
• ECM-2A0A: Rear Heated Oxygen Sensor (Ho2S). Signal Too High. Intermittent Fault (B6284T; 1999-2001)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Intermittent fault
    • Checking the wiring
    • Information
      • Fault-tracing information
• ECM-2A0A: Rear Heated Oxygen Sensor (Ho2S). Signal Too High. Intermittent Fault (B6294S; 2000-2001)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Intermittent fault
• ECM-2A0A: Rear Heated Oxygen Sensor (Ho2S). Signal Too High. Intermittent Fault (B6294S2; B6294T; 2002-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Intermittent fault
• ECM-2A0A: Rear Heated Oxygen Sensor (Ho2S). Signal Too High. Intermittent Fault (B6304S3; 1999)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Intermittent fault
• ECM-2A0A: Rear Heated Oxygen Sensor (Ho2S). Signal Too High. Permanent Fault (B6284T; 1999-2001)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Permanent fault
    • Checking components and wiring
      • Notes
      • Verification
    • Information
      • Fault-tracing information
• ECM-2A0A: Rear Heated Oxygen Sensor (Ho2S). Signal Too High. Permanent Fault (B6294S; 2000-2001)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Permanent fault
• ECM-2A0A: Rear Heated Oxygen Sensor (Ho2S). Signal Too High. Permanent Fault (B6294S2; B6294T; 2002-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Permanent fault
• ECM-2A0A: Rear Heated Oxygen Sensor (Ho2S). Signal Too High. Permanent Fault (B6304S3; 1999)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Permanent fault
• ECM-2A0A: Rear Heated Oxygen Sensor (Ho2S). Signal Too Low (B5254T2; 2004)
  • Diagnostic trouble code (DTC) information ECM-2A0A
  • Signal too low
    • Checking the wiring and component
      • Notes
      • Verification
    • Information
      • Fault-tracing information
• ECM-2A0B: Fuel Temperature Sensor. Signal Missing (B5254T2; 2006)
  • Diagnostic trouble code (DTC) information ECM-2A0B
  • Fault-tracing
• ECM-2A0C: Fuel Temperature Sensor. Signal Too High (B5254T2; B6294S2; B6294T; 2005-2006)
  • Diagnostic trouble code (DTC) information ECM-2A0C
  • Signal too high
    • Checking the status
    • Checking components and wiring
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-2A0D: Fuel Temperature Sensor. Signal Too Low (B5254T2; B6294S2; B6294T; 2005-2006)
  • Diagnostic trouble code (DTC) information ECM-2A0D
  • Fault-tracing
• ECM-2A10: Fuel Temperature Sensor. Signal Too High (B5254T2; 2006)
  • Diagnostic trouble code (DTC) information ECM-2A10
  • Fault-tracing
    • Checking the status
    • Checking the component and wiring
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-2A1A: Rear Heated Oxygen Sensor (Ho2S) Aging Faulty Signal (B5254T2; 2004)
  • Diagnostic trouble code (DTC) information
  • Permanent fault
    • Checking for air leakage in the exhaust system
    • Replacing the component
      • Notes
      • Verification
    • Information
      • Fault-tracing information
• ECM-2A1A: Rear Heated Oxygen Sensor (Ho2S) Aging Faulty Signal (B6294S2; B6294T; 2002-2004)
  • Diagnostic trouble code (DTC) information
  • Permanent fault
• ECM-2A1A: Rear Heated Oxygen Sensor (Ho2S) Aging Signal Missing (B5254T2; 2004)
  • Diagnostic trouble code (DTC) information
  • Permanent fault
• ECM-2A1A: Rear Heated Oxygen Sensor (Ho2S) Aging Signal Missing (B6294S2; B6294T; 2002-2004)
  • Diagnostic trouble code (DTC) information
  • Permanent fault
• ECM-2A1A: Rear Heated Oxygen Sensor (Ho2S) Aging Signal Too High (B5254T2; 2004)
  • Diagnostic trouble code (DTC) information
  • Permanent fault
• ECM-2A1A: Rear Heated Oxygen Sensor (Ho2S) Aging Signal Too High (B6294S2; B6294T; 2002-2004)
  • Diagnostic trouble code (DTC) information
  • Permanent fault
• ECM-2A1A: Rear Heated Oxygen Sensor (Ho2S) Aging Signal Too High. Intermittent Fault (B6284T; 1999-2001)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Intermittent fault
    • Fault-tracing information
    • Information
      • Fault-tracing information
• ECM-2A1A: Rear Heated Oxygen Sensor (Ho2S) Aging Signal Too High. Intermittent Fault (B6294S; 2000-2001)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Intermittent fault
• ECM-2A1A: Rear Heated Oxygen Sensor (Ho2S) Aging Signal Too High. Intermittent Fault (B6304S3; 1999)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Intermittent fault
• ECM-2A1A: Rear Heated Oxygen Sensor (Ho2S) Aging Signal Too High. Permanent Fault (B6284T; 1999-2001)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Permanent fault
    • Checking for air leakage in the exhaust system
    • Replacing component
      • Notes
      • Verification
    • Information
      • Fault-tracing information
• ECM-2A1A: Rear Heated Oxygen Sensor (Ho2S) Aging Signal Too High. Permanent Fault (B6294S; 2000-2001)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Permanent fault
• ECM-2A1A: Rear Heated Oxygen Sensor (Ho2S) Aging Signal Too High. Permanent Fault (B6304S3; 1999)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Permanent fault
• ECM-2A1A: Rear Heated Oxygen Sensor (Ho2S) Aging Signal Too Low (B5254T2; 2004)
  • Diagnostic trouble code (DTC) information
  • Permanent fault
• ECM-2A1A: Rear Heated Oxygen Sensor (Ho2S) Aging Signal Too Low (B6294S2; B6294T; 2002-2004)
  • Diagnostic trouble code (DTC) information
  • Permanent fault
• ECM-2A1B: Fuel Temperature Sensor. Signal Too Low (B5254T2; 2006)
  • Diagnostic trouble code (DTC) information ECM-2A1B
  • Fault-tracing
• ECM-2A1C: Fuel Temperature Sensor. Signal Too High (B5254T2; 2006)
  • Diagnostic trouble code (DTC) information ECM-2A1C
  • Fault-tracing
    • Checking the status
    • Checking the component and wiring
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-2A1D: Fuel Temperature Sensor. Signal Too Low (B5254T2; 2006)
  • Diagnostic trouble code (DTC) information ECM-2A1D
  • Fault-tracing
• ECM-2A20: Heated Oxygen Sensor (Ho2S) Bank 1, Preheating. Signal Missing (B5254T2; 2004)
  • Diagnostic trouble code (DTC) information
  • Signal missing
    • Checking the connector
    • Checking components and wiring
      • Notes
      • Verification
    • Information
      • Fault-tracing information
• ECM-2A20: Heated Oxygen Sensor (Ho2S) Bank 1, Preheating. Signal Missing (B6294S2; B6294T; 2002-2004)
  • Diagnostic trouble code (DTC) information
  • Signal missing
• ECM-2A20: Heated Oxygen Sensor (Ho2S) Bank 1, Preheating. Signal Too High (B5254T2; 2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high
    • Checking components and wiring
      • Notes
      • Verification
    • Information
      • Fault-tracing information
• ECM-2A20: Heated Oxygen Sensor (Ho2S) Bank 1, Preheating. Signal Too High (B6294S2; B6294T; 2002-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high
• ECM-2A20: Heated Oxygen Sensor (Ho2S) Bank 1, Preheating. Signal Too Low (B5254T2; 2004)
  • Diagnostic trouble code (DTC) information
  • Signal too low
    • Checking components and wiring
      • Notes
      • Verification
    • Information
      • Fault-tracing information
• ECM-2A20: Heated Oxygen Sensor (Ho2S) Bank 1, Preheating. Signal Too Low (B6294S2; B6294T; 2002-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too low
• ECM-2A2A: Rear Heated Oxygen Sensor (Ho2S) Preheating. Faulty Signal (B6294S2; B6294T; 2002-2004)
  • Diagnostic trouble code (DTC) information
  • Faulty signal
    • Checking the connector
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-2A2A: Rear Heated Oxygen Sensor (Ho2S) Preheating. Faulty Signal. Intermittent Fault (B6284T; 1999-2001)
  • Diagnostic trouble code (DTC) information
  • Faulty signal. Intermittent fault
    • Fault-tracing information
    • Information
      • Fault-tracing information
• ECM-2A2A: Rear Heated Oxygen Sensor (Ho2S) Preheating. Faulty Signal. Intermittent Fault (B6294S; 2000-2001)
  • Diagnostic trouble code (DTC) information
  • Faulty signal. Intermittent fault
• ECM-2A2A: Rear Heated Oxygen Sensor (Ho2S) Preheating. Faulty Signal. Intermittent Fault (B6304S3; 1999)
  • Diagnostic trouble code (DTC) information
  • Faulty signal. Intermittent fault
• ECM-2A2A: Rear Heated Oxygen Sensor (Ho2S) Preheating. Faulty Signal. Permanent Fault (B6284T; 1999-2001)
  • Diagnostic trouble code (DTC) information
  • Faulty signal. Permanent fault
    • Replacing component
    • Information
      • Fault-tracing information
• ECM-2A2A: Rear Heated Oxygen Sensor (Ho2S) Preheating. Faulty Signal. Permanent Fault (B6294S; 2000-2001)
  • Diagnostic trouble code (DTC) information
  • Faulty signal. Permanent fault
• ECM-2A2A: Rear Heated Oxygen Sensor (Ho2S) Preheating. Faulty Signal. Permanent Fault (B6304S3; 1999)
  • Diagnostic trouble code (DTC) information
  • Faulty signal. Permanent fault
• ECM-2A2A: Rear Heated Oxygen Sensor (Ho2S) Preheating. Signal Missing. Intermittent Fault (B6284T; 1999-2001)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Intermittent fault
    • Checking cables and connectors
    • Information
      • Fault-tracing information
• ECM-2A2A: Rear Heated Oxygen Sensor (Ho2S) Preheating. Signal Missing. Intermittent Fault (B6294S; 2000-2001)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Intermittent fault
• ECM-2A2A: Rear Heated Oxygen Sensor (Ho2S) Preheating. Signal Missing. Intermittent Fault (B6304S3; 1999)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Intermittent fault
• ECM-2A2A: Rear Heated Oxygen Sensor (Ho2S) Preheating. Signal Missing. Permanent Fault (B6284T; 1999-2001)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Permanent fault
    • Checking connector
    • Checking wiring and components
      • Notes
      • Verification
    • Information
      • Fault-tracing information
• ECM-2A2A: Rear Heated Oxygen Sensor (Ho2S) Preheating. Signal Missing. Permanent Fault (B6294S; 2000-2001)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Permanent fault
• ECM-2A2A: Rear Heated Oxygen Sensor (Ho2S) Preheating. Signal Missing. Permanent Fault (B6304S3; 1999)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Permanent fault
• ECM-2A2A: Rear Heated Oxygen Sensor (Ho2S) Preheating. Signal Too High. Intermittent Fault (B6284T; 1999-2001)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Intermittent fault
    • Checking cables
    • Information
      • Fault-tracing information
• ECM-2A2A: Rear Heated Oxygen Sensor (Ho2S) Preheating. Signal Too High. Intermittent Fault (B6294S; 2000-2001)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Intermittent fault
• ECM-2A2A: Rear Heated Oxygen Sensor (Ho2S) Preheating. Signal Too High. Intermittent Fault (B6304S3; 1999)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Intermittent fault
• ECM-2A2A: Rear Heated Oxygen Sensor (Ho2S) Preheating. Signal Too High. Permanent Fault (B6284T; 1999-2001)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Permanent fault
    • Checking wiring and components
      • Notes
      • Verification
    • Information
      • Fault-tracing information
• ECM-2A2A: Rear Heated Oxygen Sensor (Ho2S) Preheating. Signal Too High. Permanent Fault (B6294S; 2000-2001)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Permanent fault
• ECM-2A2A: Rear Heated Oxygen Sensor (Ho2S) Preheating. Signal Too High. Permanent Fault (B6304S3; 1999)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Permanent fault
• ECM-2A2A: Rear Heated Oxygen Sensor (Ho2S) Preheating. Signal Too Low. Intermittent Fault (B6284T; 1999-2001)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Intermittent fault
    • Checking cables
    • Information
      • Fault-tracing information
• ECM-2A2A: Rear Heated Oxygen Sensor (Ho2S) Preheating. Signal Too Low. Intermittent Fault (B6294S; 2000-2001)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Intermittent fault
• ECM-2A2A: Rear Heated Oxygen Sensor (Ho2S) Preheating. Signal Too Low. Intermittent Fault (B6304S3; 1999)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Intermittent fault
• ECM-2A2A: Rear Heated Oxygen Sensor (Ho2S) Preheating. Signal Too Low. Permanent Fault (B6284T; 1999-2001)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Permanent fault
    • Checking wiring and components
      • Notes
      • Verification
    • Information
      • Fault-tracing information
• ECM-2A2A: Rear Heated Oxygen Sensor (Ho2S) Preheating. Signal Too Low. Permanent Fault (B6294S; 2000-2001)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Permanent fault
• ECM-2A2A: Rear Heated Oxygen Sensor (Ho2S) Preheating. Signal Too Low. Permanent Fault (B6304S3; 1999)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Permanent fault
• ECM-2B00: Thermostat. Faulty Signal (B5254T2; B6294S2; B6294T; 2005-2006)
  • Diagnostic trouble code (DTC) information ECM-2B00
  • Faulty signal
• ECM-2B0A: Rear Lambda Probe, Bank 2. Faulty Signal. Intermittent Fault (B6284T; 1999-2001)
  • Diagnostic trouble code (DTC) information
  • Faulty signal. Intermittent fault
    • Checking the wiring
    • Information
      • Fault-tracing information
• ECM-2B0A: Rear Lambda Probe, Bank 2. Faulty Signal. Intermittent Fault (B6294S; 2000-2001)
  • Diagnostic trouble code (DTC) information
  • Faulty signal. Intermittent fault
• ECM-2B0A: Rear Lambda Probe, Bank 2. Faulty Signal. Intermittent Fault (B6294S2; B6294T; 2002-2004)
  • Diagnostic trouble code (DTC) information
  • Faulty signal. Intermittent fault
• ECM-2B0A: Rear Lambda Probe, Bank 2. Faulty Signal. Intermittent Fault (B6304S3; 1999)
  • Diagnostic trouble code (DTC) information
  • Faulty signal. Intermittent fault
• ECM-2B0A: Rear Lambda Probe, Bank 2. Faulty Signal. Permanent Fault (B6284T; 1999-2001)
  • Diagnostic trouble code (DTC) information
  • Faulty signal. Permanent fault
    • Checking components and wiring
      • Notes
      • Verification
    • Information
      • Fault-tracing information
• ECM-2B0A: Rear Lambda Probe, Bank 2. Faulty Signal. Permanent Fault (B6294S; 2000-2001)
  • Diagnostic trouble code (DTC) information
  • Faulty signal. Permanent fault
• ECM-2B0A: Rear Lambda Probe, Bank 2. Faulty Signal. Permanent Fault (B6294S2; B6294T; 2002-2004)
  • Diagnostic trouble code (DTC) information
  • Faulty signal. Permanent fault
• ECM-2B0A: Rear Lambda Probe, Bank 2. Faulty Signal. Permanent Fault (B6304S3; 1999)
  • Diagnostic trouble code (DTC) information
  • Faulty signal. Permanent fault
• ECM-2B0A: Rear Lambda Probe, Bank 2. No Signal. Intermittent Fault (B6284T; 1999-2001)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Intermittent fault
    • Checking wiring and connectors
    • Information
      • Fault-tracing information
• ECM-2B0A: Rear Lambda Probe, Bank 2. No Signal. Intermittent Fault (B6294S; 2000-2001)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Intermittent fault
• ECM-2B0A: Rear Lambda Probe, Bank 2. No Signal. Intermittent Fault (B6294S2; B6294T; 2002-2004)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Intermittent fault
• ECM-2B0A: Rear Lambda Probe, Bank 2. No Signal. Intermittent Fault (B6304S3; 1999)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Intermittent fault
• ECM-2B0A: Rear Lambda Probe, Bank 2. No Signal. Permanent Fault (B6284T; 1999-2001)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Permanent fault
    • Checking the connector
    • Checking components and wiring
      • Notes
      • Verification
    • Information
      • Fault-tracing information
• ECM-2B0A: Rear Lambda Probe, Bank 2. No Signal. Permanent Fault (B6294S; 2000-2001)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Permanent fault
• ECM-2B0A: Rear Lambda Probe, Bank 2. No Signal. Permanent Fault (B6294S2; B6294T; 2002-2004)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Permanent fault
• ECM-2B0A: Rear Lambda Probe, Bank 2. No Signal. Permanent Fault (B6304S3; 1999)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Permanent fault
• ECM-2B0A: Rear Lambda Probe, Bank 2. Signal Too High. Intermittent Fault (B6284T; 1999-2001)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Intermittent fault
    • Checking the wiring
    • Information
      • Fault-tracing information
• ECM-2B0A: Rear Lambda Probe, Bank 2. Signal Too High. Intermittent Fault (B6294S; 2000-2001)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Intermittent fault
• ECM-2B0A: Rear Lambda Probe, Bank 2. Signal Too High. Intermittent Fault (B6294S2; B6294T; 2002-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Intermittent fault
• ECM-2B0A: Rear Lambda Probe, Bank 2. Signal Too High. Intermittent Fault (B6304S3; 1999)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Intermittent fault
• ECM-2B0A: Rear Lambda Probe, Bank 2. Signal Too High. Permanent Fault (B6284T; 1999-2001)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Permanent fault
    • Checking components and wiring
      • Notes
      • Verification
    • Information
      • Fault-tracing information
• ECM-2B0A: Rear Lambda Probe, Bank 2. Signal Too High. Permanent Fault (B6294S; 2000-2001)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Permanent fault
• ECM-2B0A: Rear Lambda Probe, Bank 2. Signal Too High. Permanent Fault (B6294S2; B6294T; 2002-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Permanent fault
• ECM-2B0A: Rear Lambda Probe, Bank 2. Signal Too High. Permanent Fault (B6304S3; 1999)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Permanent fault
• ECM-2B1A: Rear Heated Oxygen Sensor (Ho2S) Aging, Bank 2. Signal Too High (B6294S2; B6294T; 2002-2004)
  • Diagnostic trouble code (DTC) information
  • Permanent fault
    • Checking for air leakage in the exhaust system
    • Replacing the component
      • Notes
      • Verification
    • Information
      • Fault-tracing information
• ECM-2B1A: Rear Heated Oxygen Sensor (Ho2S) Aging, Bank 2. Signal Too Low (B6294S2; B6294T; 2002-2004)
  • Diagnostic trouble code (DTC) information
  • Permanent fault
• ECM-2B1A: Rear Heated Oxygen Sensor (Ho2S), Aging, Bank 2. Faulty Signal (B6294S2; B6294T; 2002-2004)
  • Diagnostic trouble code (DTC) information
  • Permanent fault
• ECM-2B1A: Rear Heated Oxygen Sensor (Ho2S), Aging, Bank 2. Signal Missing (B6294S2; B6294T; 2002-2004)
  • Diagnostic trouble code (DTC) information
  • Permanent fault
• ECM-2B1A: Rear Lambda Probe Ageing, Bank 2. Signal Too High. Intermittent Fault (B6284T; 1999-2001)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Intermittent fault
    • Fault-tracing information
    • Information
      • Fault-tracing information
• ECM-2B1A: Rear Lambda Probe Ageing, Bank 2. Signal Too High. Intermittent Fault (B6294S; 2000-2001)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Intermittent fault
• ECM-2B1A: Rear Lambda Probe Ageing, Bank 2. Signal Too High. Intermittent Fault (B6304S3; 1999)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Intermittent fault
• ECM-2B1A: Rear Lambda Probe Ageing, Bank 2. Signal Too High. Permanent Fault (B6284T; 1999-2001)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Permanent fault
    • Checking for air leakage in the exhaust system
    • Replacing component
      • Notes
      • Verification
    • Information
      • Fault-tracing information
• ECM-2B1A: Rear Lambda Probe Ageing, Bank 2. Signal Too High. Permanent Fault (B6294S; 2000-2001)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Permanent fault
• ECM-2B1A: Rear Lambda Probe Ageing, Bank 2. Signal Too High. Permanent Fault (B6304S3; 1999)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Permanent fault
• ECM-2B20: Heated Oxygen Sensor (Ho2S) Bank 2, Preheating. Signal Missing (B6294S2; B6294T; 2002-2004)
  • Diagnostic trouble code (DTC) information
  • Signal missing
    • Checking the connector
    • Checking components and wiring
      • Notes
      • Verification
    • Information
      • Fault-tracing information
• ECM-2B20: Heated Oxygen Sensor (Ho2S) Bank 2, Preheating. Signal Too High (B6294S2; B6294T; 2002-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high
    • Checking components and wiring
      • Notes
      • Verification
    • Information
      • Fault-tracing information
• ECM-2B20: Heated Oxygen Sensor (Ho2S) Bank 2, Preheating. Signal Too Low (B6294S2; B6294T; 2002-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too low
    • Checking components and wiring
      • Notes
      • Verification
    • Information
      • Fault-tracing information
• ECM-2B2A: Rear Heated Oxygen Sensor (Ho2S) Preheating, Bank 2. Faulty Signal (B6294S2; B6294T; 2002-2004)
  • Diagnostic trouble code (DTC) information
  • Faulty signal
    • Checking the connector
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-2B2A: Rear Lambda Probe Pre-Heating, Bank 2. Faulty Signal. Intermittent Fault. (B6284T; 1999-2001)
  • Diagnostic trouble code (DTC) information
  • Faulty signal. Intermittent fault
    • Fault-tracing information
    • Information
      • Fault-tracing information
• ECM-2B2A: Rear Lambda Probe Pre-Heating, Bank 2. Faulty Signal. Intermittent Fault. (B6294S; 2000-2001)
  • Diagnostic trouble code (DTC) information
  • Faulty signal. Intermittent fault
• ECM-2B2A: Rear Lambda Probe Pre-Heating, Bank 2. Faulty Signal. Intermittent Fault. (B6304S3; 1999)
  • Diagnostic trouble code (DTC) information
  • Faulty signal. Intermittent fault
• ECM-2B2A: Rear Lambda Probe Pre-Heating, Bank 2. Faulty Signal. Permanent Fault. (B6284T; 1999-2001)
  • Diagnostic trouble code (DTC) information
  • Faulty signal. Permanent fault
    • Replacing component
    • Information
      • Fault-tracing information
• ECM-2B2A: Rear Lambda Probe Pre-Heating, Bank 2. Faulty Signal. Permanent Fault. (B6294S; 2000-2001)
  • Diagnostic trouble code (DTC) information
  • Faulty signal. Permanent fault
• ECM-2B2A: Rear Lambda Probe Pre-Heating, Bank 2. Faulty Signal. Permanent Fault. (B6304S3; 1999)
  • Diagnostic trouble code (DTC) information
  • Faulty signal. Permanent fault
• ECM-2B2A: Rear Lambda Probe Pre-Heating, Bank 2. No Signal. Intermittent Fault. (B6284T; 1999-2001)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Intermittent fault
    • Checking cables and connectors
    • Information
      • Fault-tracing information
• ECM-2B2A: Rear Lambda Probe Pre-Heating, Bank 2. No Signal. Intermittent Fault. (B6294S; 2000-2001)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Intermittent fault
• ECM-2B2A: Rear Lambda Probe Pre-Heating, Bank 2. No Signal. Intermittent Fault. (B6304S3; 1999)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Intermittent fault
• ECM-2B2A: Rear Lambda Probe Pre-Heating, Bank 2. No Signal. Permanent Fault. (B6284T; 1999-2001)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Permanent fault
    • Checking connector
    • Checking wiring and components
      • Notes
      • Verification
    • Information
      • Fault-tracing information
• ECM-2B2A: Rear Lambda Probe Pre-Heating, Bank 2. No Signal. Permanent Fault. (B6294S; 2000-2001)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Permanent fault
• ECM-2B2A: Rear Lambda Probe Pre-Heating, Bank 2. No Signal. Permanent Fault. (B6304S3; 1999)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Permanent fault
• ECM-2B2A: Rear Lambda Probe Pre-Heating, Bank 2. Signal Too High. Intermittent Fault. (B6284T; 1999-2001)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Intermittent fault
    • Checking cables
    • Information
      • Fault-tracing information
• ECM-2B2A: Rear Lambda Probe Pre-Heating, Bank 2. Signal Too High. Intermittent Fault. (B6294S; 2000-2001)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Intermittent fault
• ECM-2B2A: Rear Lambda Probe Pre-Heating, Bank 2. Signal Too High. Intermittent Fault. (B6304S3; 1999)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Intermittent fault
• ECM-2B2A: Rear Lambda Probe Pre-Heating, Bank 2. Signal Too High. Permanent Fault. (B6284T; 1999-2001)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Permanent fault
    • Checking wiring and components
      • Notes
      • Verification
    • Information
      • Fault-tracing information
• ECM-2B2A: Rear Lambda Probe Pre-Heating, Bank 2. Signal Too High. Permanent Fault. (B6294S; 2000-2001)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Permanent fault
• ECM-2B2A: Rear Lambda Probe Pre-Heating, Bank 2. Signal Too High. Permanent Fault. (B6304S3; 1999)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Permanent fault
• ECM-2B2A: Rear Lambda Probe Pre-Heating, Bank 2. Signal Too Low. Intermittent Fault. (B6284T; 1999-2001)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Intermittent fault
    • Checking cables
    • Information
      • Fault-tracing information
• ECM-2B2A: Rear Lambda Probe Pre-Heating, Bank 2. Signal Too Low. Intermittent Fault. (B6294S; 2000-2001)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Intermittent fault
• ECM-2B2A: Rear Lambda Probe Pre-Heating, Bank 2. Signal Too Low. Intermittent Fault. (B6304S3; 1999)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Intermittent fault
• ECM-2B2A: Rear Lambda Probe Pre-Heating, Bank 2. Signal Too Low. Permanent Fault. (B6284T; 1999-2001)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Permanent fault
    • Checking wiring and components
      • Notes
      • Verification
    • Information
      • Fault-tracing information
• ECM-2B2A: Rear Lambda Probe Pre-Heating, Bank 2. Signal Too Low. Permanent Fault. (B6294S; 2000-2001)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Permanent fault
• ECM-2B2A: Rear Lambda Probe Pre-Heating, Bank 2. Signal Too Low. Permanent Fault. (B6304S3; 1999)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Permanent fault
• ECM-2C0B: Injector CYL 1. Signal Missing (B6294S2; B6294T; 2005-2006)
  • Diagnostic trouble code (DTC) information
  • Signal missing
    • Checking components and wiring
      • Notes
      • Verification
    • Information
      • Fault-tracing information
• ECM-2C0C: Injector CYL 1. Signal Too High (B6294S2; B6294T; 2005-2006)
  • Diagnostic trouble code (DTC) information
  • Signal too high
    • Checking components and wiring
      • Notes
      • Verification
    • Information
      • Fault-tracing information
• ECM-2C0D: Injector CYL 1. Signal Too Low (B6294S2; B6294T; 2005-2006)
  • Diagnostic trouble code (DTC) information
  • Signal too low
    • Checking components and wiring
      • Notes
      • Verification
    • Information
      • Fault-tracing information
• ECM-2C1B: Injector CYL 2. Signal Missing (B6294S2; B6294T; 2005-2006)
  • Diagnostic trouble code (DTC) information
  • Signal missing
• ECM-2C1C: Injector CYL 2. Signal Too High (B6294S2; B6294T; 2005-2006)
  • Diagnostic trouble code (DTC) information
  • Signal too high
• ECM-2C1D: Injector CYL 2. Signal Too Low (B6294S2; B6294T; 2005-2006)
  • Diagnostic trouble code (DTC) information
  • Signal too low
• ECM-2C2B: Injector CYL 3. Signal Missing (B6294S2; B6294T; 2005-2006)
  • Diagnostic trouble code (DTC) information
  • Signal missing
• ECM-2C2C: Injector CYL 3. Signal Too High (B6294S2; B6294T; 2005-2006)
  • Diagnostic trouble code (DTC) information
  • Signal too high
• ECM-2C2D: Injector CYL 3. Signal Too Low (B6294S2; B6294T; 2005-2006)
  • Diagnostic trouble code (DTC) information
  • Signal too low
• ECM-2C3B: Injector CYL 4. Signal Missing (B6294S2; B6294T; 2005-2006)
  • Diagnostic trouble code (DTC) information
  • Signal missing
• ECM-2C3C: Injector CYL 4. Signal Too High (B6294S2; B6294T; 2005-2006)
  • Diagnostic trouble code (DTC) information
  • Signal too high
• ECM-2C3D: Injector CYL 4. Signal Too Low (B6294S2; B6294T; 2005-2006)
  • Diagnostic trouble code (DTC) information
  • Signal too low
• ECM-2C4B: Injector CYL 5. Signal Missing (B6294S2; B6294T; 2005-2006)
  • Diagnostic trouble code (DTC) information
  • Signal missing
• ECM-2C4C: Injector CYL 5. Signal Too High (B6294S2; B6294T; 2005-2006)
  • Diagnostic trouble code (DTC) information
  • Signal too high
• ECM-2C4D: Injector CYL 5. Signal Too Low (B6294S2; B6294T; 2005-2006)
  • Diagnostic trouble code (DTC) information
  • Signal too low
• ECM-2C5B: Injector CYL 6. Signal Missing (B6294S2; B6294T; 2005-2006)
  • Diagnostic trouble code (DTC) information
  • Signal missing
• ECM-2C5C: Injector CYL 6. Signal Too High (B6294S2; B6294T; 2005-2006)
  • Diagnostic trouble code (DTC) information
  • Signal too high
• ECM-2C5D: Injector CYL 6. Signal Too Low (B6294S2; B6294T; 2005-2006)
  • Diagnostic trouble code (DTC) information
  • Signal too low
• ECM-3000: Camshaft Position (CMP) Sensor, Intake. Faulty Signal Or Signal Missing (B5254T2; 2004)
  • Diagnostic trouble code (DTC) information
  • Faulty signal or signal missing
    • Checking the status
    • Checking components and connectors
      • Notes
      • Verification
    • Information
      • Fault-tracing information
• ECM-3000: Camshaft Position (CMP) Sensor, Intake. Faulty Signal Or Signal Missing (B6294S2; B6294T; 2002-2004)
  • Diagnostic trouble code (DTC) information
  • Faulty signal or signal missing
    • Checking the status
    • Checking components and connectors
      • Notes
      • Verification
    • Information
      • Fault-tracing information
• ECM-3000: Camshaft Position (CMP) Sensor, Intake. Signal Too High (B5254T2; 2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high
    • Checking the status
    • Checking connectors and wiring
      • Notes
      • Verification
    • Information
      • Fault-tracing information
• ECM-3000: Camshaft Position (CMP) Sensor, Intake. Signal Too High. Intermittent Fault (B6294S2; B6294T; 2002-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Intermittent fault
    • Checking cables
    • Information
      • Fault-tracing information
• ECM-3000: Camshaft Position (CMP) Sensor, Intake. Signal Too High. Permanent Fault (B6294S2; B6294T; 2002-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Permanent fault
    • Checking connector
    • Checking cables
      • Notes
      • Verification
    • Information
      • Fault-tracing information
• ECM-3000: Camshaft Position (CMP) Sensor, Intake. Signal Too Low (B5254T2; 2004)
  • Diagnostic trouble code (DTC) information
  • Signal too low
    • Checking the status
    • Checking the wiring
      • Notes
      • Verification
    • Information
      • Fault-tracing information
• ECM-3000: Camshaft Position (CMP) Sensor, Intake. Signal Too Low. Intermittent Fault (B6294S2; B6294T; 2002-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Intermittent fault
    • Checking cables
    • Information
      • Fault-tracing information
• ECM-3000: Camshaft Position (CMP) Sensor, Intake. Signal Too Low. Permanent Fault (B6294S2; B6294T; 2002-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Permanent fault
    • Checking connector
    • Checking cables
      • Notes
      • Verification
    • Information
      • Fault-tracing information
• ECM-3000: Camshaft Position (CMP) Sensor. Faulty Signal. Intermittent Fault (B6284T; 1999-2001)
  • Diagnostic trouble code (DTC) information
  • Faulty signal. Intermittent fault
    • Checking cables
    • Information
      • Fault-tracing information
• ECM-3000: Camshaft Position (CMP) Sensor. Faulty Signal. Intermittent Fault (B6294S; 2000-2001)
  • Diagnostic trouble code (DTC) information
  • Faulty signal. Intermittent fault
• ECM-3000: Camshaft Position (CMP) Sensor. Faulty Signal. Intermittent Fault (B6304S3; 1999)
  • Diagnostic trouble code (DTC) information
  • Faulty signal. Intermittent fault
• ECM-3000: Camshaft Position (CMP) Sensor. Faulty Signal. Permanent Fault (B6284T; 1999-2001)
  • Diagnostic trouble code (DTC) information
  • Faulty signal. Permanent fault
    • Checking connector
    • Checking cables
      • Notes
      • Verification
    • Information
      • Fault-tracing information
• ECM-3000: Camshaft Position (CMP) Sensor. Faulty Signal. Permanent Fault (B6294S; 2000-2001)
  • Diagnostic trouble code (DTC) information
  • Faulty signal. Permanent fault
• ECM-3000: Camshaft Position (CMP) Sensor. Faulty Signal. Permanent Fault (B6304S3; 1999)
  • Diagnostic trouble code (DTC) information
  • Faulty signal. Permanent fault
• ECM-3000: Camshaft Position (CMP) Sensor. Signal Too High. Intermittent Fault (B6284T; 1999-2001)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Intermittent fault
• ECM-3000: Camshaft Position (CMP) Sensor. Signal Too High. Intermittent Fault (B6294S; 2000-2001)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Intermittent fault
• ECM-3000: Camshaft Position (CMP) Sensor. Signal Too High. Intermittent Fault (B6304S3; 1999)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Intermittent fault
• ECM-3000: Camshaft Position (CMP) Sensor. Signal Too High. Permanent Fault (B6284T; 1999-2001)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Permanent fault
• ECM-3000: Camshaft Position (CMP) Sensor. Signal Too High. Permanent Fault (B6294S; 2000-2001)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Permanent fault
• ECM-3000: Camshaft Position (CMP) Sensor. Signal Too High. Permanent Fault (B6304S3; 1999)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Permanent fault
• ECM-3000: Camshaft Position (CMP) Sensor. Signal Too Low. Intermittent Fault (B6284T; 1999-2001)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Intermittent fault
• ECM-3000: Camshaft Position (CMP) Sensor. Signal Too Low. Intermittent Fault (B6294S; 2000-2001)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Intermittent fault
• ECM-3000: Camshaft Position (CMP) Sensor. Signal Too Low. Intermittent Fault (B6304S3; 1999)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Intermittent fault
• ECM-3000: Camshaft Position (CMP) Sensor. Signal Too Low. Permanent Fault (B6284T; 1999-2001)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Permanent fault
• ECM-3000: Camshaft Position (CMP) Sensor. Signal Too Low. Permanent Fault (B6294S; 2000-2001)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Permanent fault
• ECM-3000: Camshaft Position (CMP) Sensor. Signal Too Low. Permanent Fault (B6304S3; 1999)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Permanent fault
• ECM-3000: Engine Control Module (ECM), Internal Fault. Faulty Signal (B5254T2; B6294S2; B6294T; 2005-2006)
  • Diagnostic trouble code (DTC) information ECM-3000
  • Internal fault
• ECM-3010: Camshaft Position (CMP) Sensor, Exhaust. Faulty Signal Or Signal Missing (B5254T2; 2004)
  • Diagnostic trouble code (DTC) information
  • Faulty signal or signal missing
    • Checking the status
    • Checking components and connectors
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-3010: Camshaft Position (CMP) Sensor, Exhaust. Faulty Signal Or Signal Missing (B6294S2; B6294T; 2002-2004)
  • Diagnostic trouble code (DTC) information
  • Faulty signal or signal missing
    • Checking the status
    • Checking components and connectors
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-3010: Camshaft Position (CMP) Sensor, Exhaust. Signal Too High (B5254T2; 2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high
    • Checking the status
    • Checking the wiring
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-3010: Camshaft Position (CMP) Sensor, Exhaust. Signal Too High (B6294S2; B6294T; 2002-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high
    • Checking the status
    • Checking the wiring
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-3010: Camshaft Position (CMP) Sensor, Exhaust. Signal Too Low (B5254T2; 2004)
  • Diagnostic trouble code (DTC) information
  • Signal too low
    • Checking the status
    • Checking connectors and wiring
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-3010: Camshaft Position (CMP) Sensor, Exhaust. Signal Too Low (B6294S2; B6294T; 2002-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too low
    • Checking the status
    • Checking connectors and wiring
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-3010: Engine Control Module (ECM), Internal Fault. Faulty Signal (B5254T2; B6294S2; B6294T; 2005-2006)
  • Diagnostic trouble code (DTC) information ECM-3010
  • Internal fault
• ECM-3020: Engine Control Module (ECM), Internal Fault. Faulty Signal (B5254T2; B6294S2; B6294T; 2005-2006)
  • Diagnostic trouble code (DTC) information ECM-3020
  • Internal fault
• ECM-303C: Front Knock Sensor (KS). Signal Too High (B5254T2; B6294S2; B6294T; 2005-2006)
  • Diagnostic trouble code (DTC) information ECM-303C
  • Signal too high. Permanent fault
    • Checking components and wiring
      • Notes
      • Verification
    • Information
      • Fault-tracing information
• ECM-303D: Front Knock Sensor (KS). Signal Too Low (B5254T2; B6294S2; B6294T; 2005-2006)
  • Diagnostic trouble code (DTC) information ECM-303D
  • Signal too low. Permanent fault
    • Checking wiring and connectors
    • Checking the knock sensor (KS) signal
    • Replacing the component
      • Notes
      • Verification
    • Information
      • Fault-tracing information
• ECM-304C: Rear Knock Sensor (KS). Signal Too High (B5254T2; B6294S2; B6294T; 2005-2006)
  • Diagnostic trouble code (DTC) information ECM-304C
  • Signal too high. Permanent fault
    • Checking components and wiring
      • Notes
      • Verification
    • Information
      • Fault-tracing information
• ECM-304D: Rear Knock Sensor (KS). Signal Too Low (B5254T2; B6294S2; B6294T; 2005-2006)
  • Diagnostic trouble code (DTC) information ECM-304D
  • Signal too low. Permanent fault
    • Checking wiring and connectors
    • Checking the knock sensor (KS) signal
    • Replacing the component
      • Notes
      • Verification
    • Information
      • Fault-tracing information
• ECM-3100: Engine Speed (Rpm) Sensor. Signal Missing (B5254T2; 2004)
  • Diagnostic trouble code (DTC) information
  • Signal missing
    • Checking connectors and wiring
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-3100: Engine Speed (Rpm) Sensor. Signal Missing. Intermittent Fault (B6284T; 1999-2001)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Intermittent fault
    • Checking connectors and wiring
    • Information
      • Fault-tracing information
• ECM-3100: Engine Speed (Rpm) Sensor. Signal Missing. Intermittent Fault (B6294S; 2000-2001)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Intermittent fault
• ECM-3100: Engine Speed (Rpm) Sensor. Signal Missing. Intermittent Fault (B6294S2; B6294T; 2002-2004)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Intermittent fault
• ECM-3100: Engine Speed (Rpm) Sensor. Signal Missing. Intermittent Fault (B6304S3; 1999)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Intermittent fault
• ECM-3100: Engine Speed (Rpm) Sensor. Signal Missing. Permanent Fault (B6284T; 1999-2001)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Permanent fault
    • Checking connectors and wiring
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-3100: Engine Speed (Rpm) Sensor. Signal Missing. Permanent Fault (B6294S; 2000-2001)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Permanent fault
• ECM-3100: Engine Speed (Rpm) Sensor. Signal Missing. Permanent Fault (B6294S2; B6294T; 2002-2004)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Permanent fault
• ECM-3100: Engine Speed (Rpm) Sensor. Signal Missing. Permanent Fault (B6294T; 2002-2006)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Permanent fault
• ECM-3100: Engine Speed (Rpm) Sensor. Signal Missing. Permanent Fault (B6304S3; 1999)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Permanent fault
• ECM-3100: Misfire, At Least One Cylinder. Start Up (B5254T2; B6294S2; B6294T; 2005-2006)
  • Diagnostic trouble code (DTC) information ECM-3100
  • Emissions impact / Catalytic converter damage / Start up
    • Checking the fuel injection system, ignition system and components
    • Verification
      • Verification
    • Information
      • Fault-tracing information
    • Air-leaks: in the intake system, checking
      • Notes
      • Removal
      • Installation
• ECM-310C: Misfire, At Least One Cylinder. Catalytic Converter Damage (B5254T2; B6294S2; B6294T; 2005-2006)
  • Diagnostic trouble code (DTC) information ECM-310C
  • Emissions impact / Catalytic converter damage / Start up
• ECM-310D: Misfire, At Least One Cylinder. Affects Emissions (B5254T2; B6294S2; B6294T; 2005-2006)
  • Diagnostic trouble code (DTC) information ECM-310D
  • Emissions impact / Catalytic converter damage / Start up
• ECM-3110: Misfire Cylinder 1. Start Up (B5254T2; 2005-2006)
  • Diagnostic trouble code (DTC) information
  • Emissions impact / Catalytic converter damage / Start up
• ECM-311C: Misfire Cylinder 1. Catalytic Converter Damage (B5254T2; 2005-2006)
  • Diagnostic trouble code (DTC) information
  • Emissions impact / Catalytic converter damage / Start up