Checking other response codes

Fig 1: Identifying Ignition ON

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Ignition on.
  Fig 2: Identifying Scan Tool

  Courtesy of VOLVO CARS OF NORTH AMERICA.
  • Activate the Scan Tool (ST) in MODE 2.
  • Move the ON/OFF switch to the ON position.
  • Activate the SET+ switch.
  • Check that the SET+ function is OK by checking that response code 1-3-1 is returned.
  Fig 3: Programming Cruise Control

  Courtesy of VOLVO CARS OF NORTH AMERICA.

Is response code 1-3-1 returned? 

• YES 

  Refer to Checking the selector switch 

• NO 

  Refer to Checking the voltage to the selector switch