Reprogram Error Recovery
WARNING: This page does not describe the selected car, but rather 126 other vehicles, including the 1999 Volvo V70, 1999 Volvo S80, 1999 Volvo S70, 1999 Volvo C70, and 1999 Volkswagen Passat. However, it is still accessible from the selected car via links, so may be relevant.
- Using 1st key, start engine. After SECURITY light illuminates for 1-2 seconds, turn 1st key to LOCK position. Using 1st key, turn ignition to ON position, then LOCK position 5 times.
- Using 1st key, turn ignition to ON position. SECURITY light should illuminate. Turn 1st key to LOCK position and remove key. SECURITY light should go out.
- Using 2nd key, start engine. SECURITY light should illuminate for 1-2 seconds and engine should continue to run. Turn 2nd key to LOCK position and remove key.
- Repeat step 3) with 1st key. Repeat step 3) with 3rd key. Repeat step 3) with each new key, up to 8 keys total. Wait 30 seconds, program will quit automatically. After reprogramming is complete, clear DTCs with NGS tester.