Immobilizer Module (IMM) DTCS
IMMOBILIZER MODULE (IMM) - DTC INDEX
| DTC | Description |
|---|---|
| IMM-112 | Control module, Internal fault |
| IMM-121 | PIN, Cannot be programmed |
| IMM-122 | Control module. Initiation fault |
| IMM-132 | Key codes. Not programmed |
| IMM-213 | Communication with engine control module (ECM), Faulty communication (B4204T3 (CA) (US)) |
| IMM-214 | Communication with engine control module (ECM), Incorrect MIN code (B4204T3 (CA) (US)) |
| IMM-225 | Key codes. Fault in software |
| IMM-233 | Antenna ring. Signal missing |
| IMM-234 | Transponder communication, No communication |
| IMM-235 | Key unknown, Not stored |
| IMM-312 | Communication with the engine control module (ECM). Signal too low (B4204T3 (CA) (US)) |
| IMM-321 | Communication with the engine control module (ECM). Signal missing (B4204T3 (CA) (US)) |
| IMM-334 | Control circuit for the indicator lamp. Faulty signal |
| IMM-335 | Control circuit for the starter motor relay |
| IMM-335 | Control circuit for the starter motor relay. Signal too high |
| IMM-336 | Communication with the control module. Faulty signal |