Brake Control System - General Diagnostics And Tests
- Checking The Ground Terminals, Brake Control Module (2002-2006)
- Checking The Power Supply And Ground Connection (1999-2001)
- Checking the power supply and ground terminals for the control module
- Question
- Checking the 15-supply to the control module
- Checking fuse 11/9
- Checking for a short-circuit and replacing the component
- Checking the voltage before the fuse
- Checking for an open-circuit in the cable
- Checking the 30-supply (valves) to the control module
- Checking fuses
- Checking the 30-supply (pump motor) to the control module
- Connecting the breakout box
- Checking ground terminals
- Reading is OK
- Value is not OK
- Verification
- Information
- Checking the power supply and ground terminals for the control module
- Connecting the breakout box
- Checking the ground terminals
- Checking the 15-supply to the control module
- Checking fuses
- Checking for a short-circuit
- Checking the voltage before the fuse
- Checking for an open-circuit
- Checking the 30-supply (valves) to the control module
- Checking the 30-supply (pump motor) to the control module
- Verification
- Checking the power supply and ground terminals for the control module
- Checking The Power Supply, Brake Control Module (2002-2006)
- Connecting The Breakout Box (2002-2006)
- Connecting The Breakout Box (1999-2001)
- Connecting The Breakout Box, Brake Control Module (BCM) (2002-2006)