Driver Information Control Unit - Removal And Installation

• Driver Information Control Unit
  • Driver information control unit, replacing
    • Preparation
    • Removal of driver information control unit
    • Installation of driver information control unit
    • Ordering software
    • Programming the control unit
    • Handling replaced SRS airbags/seat belt tensioners
      • Handling
      • Storage and transport
      • Disassembling steering wheel with switches
        • Notes
        • Ignition off. Disconnect battery negative lead
        • Removing steering wheel screws
        • Removing steering wheel module
        • Placing the steering wheel module
        • Connecting special tool
        • Slacken off center screw
        • Reconnect the battery negative lead
        • Align front wheels
        • Disconnect the battery negative lead
        • Remove special tool
        • Secure the contact reel
        • Remove the steering wheel center screw
        • Remove steering wheel, steering wheel covers and switches
      • Assembling steering wheel with switches
        • Zeroing contact reel
        • Install switches, steering wheel covers and steering wheel
        • Install center screw
        • Unlocking the contact reel
        • Connect special tool
        • Reconnect the battery negative lead
        • Align front wheels
        • Tightening center screw
        • Ignition off. Disconnect battery negative lead
        • Remove special tool
        • Ignition in position I
        • Install steering wheel module
        • Tighten steering wheel screws
      • Conclusion
        • SRS Airbag date decal
        • Ignition in position II. Reconnect battery negative lead
        • Check:
    • Panel and SRS passenger airbag module
      • Preparations
        • Ignition off and disconnect the battery negative lead
      • Disassembly
        • Glove compartment
        • SRS ignition cable
        • SRS-airbag screws
        • Ventilation and loudspeaker grilles
        • Panel screws
        • SRS airbag
      • Replacing seals
        • Installing seals on dashboard frame
        • Removing the old seals from the panel
      • Installation
        • Assemble in reverse order
      • Completion
        • SRS Airbag date decal
        • Ignition in position II. Reconnect the battery negative lead
        • Check
    • SRS contact reel, resetting
      • Remove screw
      • Turn to the left
      • Turn to the right
      • Install screw