Air conditioning (ECC and MCC only)
The engine control module (ECM) controls the A/C compressor. When the A/C switch on the dashboard environment panel is activated, a request to activate the compressor is transmitted via Control area network (CAN) to the engine control module (ECM). The engine control module (ECM) determines when the compressor must operate.
If any of the following conditions are met the compressor is disconnected:
- High engine coolant temperature (ECT)
- Wide open throttle (WOT)
- The engine has just been started
- Overpressure in the air conditioning (A/C) system.
When the engine is started the engine control module (ECM) activates the air conditioning compressor for a short period even if the climate control module (CCM) has not transmitted a request about this. This is carried out for diagnosis. This check is carried out at all temperatures exceeding -6 °C.
The advantage in allowing the engine control module (ECM) to control the air conditioning compressor is that it can delay compressor activation somewhat, if the idling speed must be compensated for the extra load for example.