Engine, Fuel & Ignition Control Systems - Removal & Installation, Specifications

• Ignition And Control Systems
  • Specifications, Mechanical
    • Notes
    • Engine Manufacture Number, Engine Serial Number And Type
    • Classification Of Main Bearings
    • General Data
    • Cylinder Block
    • Pistons
    • Valves
    • Valve seats
    • Tappets
    • Valve springs
    • Valve Guides
    • Camshafts
    • Cylinder Head
    • Crank Mechanism
    • Engine Oil
    • Fuel Line Pressure
  • Steering Wheel With Switches
    • Disassembling
      • Notes
      • Ignition Off. Disconnect Battery Negative Lead
      • Removing Steering Wheel Screws
      • Removing Steering Wheel Module
      • Placing The Steering Wheel Module
      • Connecting Special Tool
      • Slacken Off Center Screw
      • Reconnect The Battery Negative Lead
      • Align Front Wheels
      • Disconnect The Battery Negative Lead
      • Remove Special Tool
      • Secure The Contact Reel
      • Remove The Steering Wheel Center Screw
      • Remove Steering Wheel, Steering Wheel Covers And Switches
    • Assembling
      • Zeroing Contact Reel
      • Install Switches, Steering Wheel Covers And Steering Wheel
      • Install Center Screw
      • Unlocking The Contact Reel
      • Connect Special Tool
      • Reconnect The Battery Negative Lead
      • Align Front Wheels
      • Tightening Center Screw
      • Ignition Off. Disconnect Battery Negative Lead
      • Remove Special Tool
      • Ignition In Position I
      • Install Steering Wheel Module
      • Tighten Steering Wheel Screws
      • Conclusion
        • SRS Airbag Date Decal
        • Ignition In Position II. Reconnect Battery Negative Lead
        • Check:
  • Taking Fuel Pressure Readings While Driving The Car
    • Notes
    • Installing Test Equipment
    • Connecting Fuel Pressure Gauge
    • Connecting Fuel Draining Unit
    • Measuring Fuel Pressure
    • Removing Fuel Pressure Gauge
    • Removing Fuel Draining Unit
  • Temperature And Pressure Sensor, Replacing
    • Notes
    • Thermostat, Replacing (D5244Tx; 2000-)
      • Removal
        • Preparation
        • Removing The Temperature Sensor
        • Installing The Temperature Sensor
        • Removing The Thermostat
      • Installation
        • Installing The Thermostat
        • Finishing
        • Function Test
  • Engine Coolant Temperature Sensor, Replacing
  • Test Phases, Quick Test Fuel Tank System (B5234T3; B5244T5; B5254T2; B5254T4; 2003-2007)
    • Reference
    • Major Leak
    • Minor Leak
    • Not In Progress
  • Test Phases, Quick Test Fuel Tank System (B5244S; 2003-2007)
    • Reference
    • Major Leak
    • Minor Leak
    • Not In Progress
  • CAN Network
    • General
    • Advantages Of A Network
  • Thermostat, Replacing (B5234T3; B5254T2; B5254T4; 2003-2004)
  • Throttle Body (Electronic Throttle Module (ETM)), Replacing
  • Throttle Body (TB), Cleaning (B5234T3; B5244T3; 2001-2004)
  • Throttle Body (TB), Cleaning (B5244S; B5244S6; 2001-2004)
  • Timing Cover Front, Replacing
    • Removal And Installation
      • Removing The Front Timing Cover
      • Expansion Tank
      • Installing The Front Timing Cover
  • Variable Valve Timing Control
  • Variable Valve Timing Solenoid, Replacing
  • Variable Valve Timing Solenoid, Replacing (6-cylinder engines)
    • Removing The Variable Valve Timing (VVT) Control Valve
    • Installing The Variable Valve Timing (VVT) Control Valve
  • Variable Valve Timing Unit, Checking And Adjusting (B5234T3; B5244T3; 2001)
    • Notes
    • Installing And Adjusting The Variable Valve Timing Unit/Gear Pulley On The Camshafts.
      • Notes
      • Installing The Crankshaft Adjustment Tool
      • Installing The Variable Valve Timing (VVT) Unit On The Camshaft
      • Installing The Timing Gear Pulley On The Exhaust Camshaft
      • Checking The Tensioner And Idler Pulleys
      • Installing The Tensioner/Damping Unit
      • Installing The Timing Belt
      • Tensioning Of Cam Belt
      • Tightening
      • Checking The Markings And Belt Tension
  • Variable Valve Timing Unit, Checking And Adjusting (B5244S; 2001-2007)
    • Notes
    • Installing And Adjusting The Variable Valve Timing Unit/Timing Gear Pulley On The Camshaft
      • Notes
      • Installing The Crankshaft Adjustment Tool
      • Aligning The Crankshaft
      • Installing The Variable Valve Timing Unit On The Camshaft
      • Installing The Timing Belt
      • Tensioning Of Cam Belt
      • Tightening
      • Final Check
      • Checking the markings and belt tension
  • Variable Valve Timing Unit, Checking And Adjusting (B5XX4TX; 1999-2001)
    • Notes
    • Installing and adjusting the variable valve timing unit/timing gear pulley on the camshaft
    • Installing The Crankshaft Adjustment Tool
    • Aligning The Crankshaft
    • Installing The Variable Valve Timing Unit On The Camshaft
    • Installing The Timing Belt
    • Tighten The Timing Belt
      • Adjust The Belt Tensioner
      • Tension The Timing Belt As Follows:
      • Removal
      • Checking The Markings And Belt Tension
  • Variable Valve Timing Unit, Checking And Adjusting (B5XX4S and B5XX4S2; 2002-)
    • Notes
    • Installing The Crankshaft Adjustment Tool
    • Aligning The Crankshaft
    • Installing The Camshaft Variable Valve Timing Unit
    • Installing The Camshaft Belt
    • Tensioning The Camshaft Belt
    • Tightening
    • Removing The Camshaft Adjustment Tool
    • Final Check
  • Variable Valve Timing Unit, Checking And Adjusting (B6XX4T; 2002-2006)
    • Notes
    • Installing The Crankshaft Adjustment Tool
    • Aligning The Crankshaft
    • Installing The Variable Valve Timing (VVT) Unit On The Exhaust Camshaft
    • Installing The Variable Valve Timing (VVT) Unit On The Intake Camshaft
    • Installing The Camshaft Belt
    • Preparations For Adjusting The Timing Belt
    • Adjusting The Timing Belt
    • Checking The Markings And Belt Tension
  • VVT Solenoid, Inspection And Cleaning
    • Inspection
      • Inspection
      • Cleaning
      • VVT solenoid, cleaning
      • Removal
      • Testing