Rear Electronic Module And Cargo Compartment Relay/Fuse Box - Removal And Installation

• Electrical
  • Housing with half-open contact side
    • (When the cable terminals are partly exposed with the locking tabs visible in the cavities)
  • Housings with round cavity opening
    • Cable terminals that are extracted without using a terminal removal tool
      • 1.6 Pin/Pin sockets
      • 3.5 Moisture proof Pin/Pin sockets
    • Cable terminals that are extracted with terminal removal tools
      • 2.1 Pin/Pin sockets and 3.5 Pin/Pin sockets
  • Housings with square cavity openings
    • Terminal removal tool
    • Single or double cavity row
    • Single cavity row
    • Double cavity row
    • Proceed to
  • Joining cables
    • Notes
    • Connecting
    • Junction sleeve
  • New cable terminal
    • Notes
    • Identify the cable terminal
    • If no similar cable terminal is available in the cable terminal assortment
  • Primary locking in general
    • Notes
    • Primary locking in cavities
    • Primary locking on cable terminals
    • Without primary locking
    • Release primary locking
  • Relay/fuse box cargo compartment/Rear electronic module (REM), replacing
    • Notes
    • Exposing the integrated relay/fusebox in the cargo compartment
    • Relay and fuse location, 11D
      • Notes
      • Installing the integrated relay / fusebox in the cargo compartment
    • Replacing the rear electronic module (REM)
      • Notes
      • Removing the control module
      • Check
      • Installing the control module
  • Repair kit, p/n 9814235