Engine Control Module (ECM) Diagnostic Trouble Codes (XC) - 5 Of 9

• ECM-431D: Leak Diagnostic Unit. Signal Missing (B5254T2; 2003-04)
  • Diagnostic trouble code (DTC) information
  • Fault-tracing
• ECM-431D: Leak Diagnostic Unit. Signal Too High (B5244T3; 2002)
  • Diagnostic trouble code (DTC) information
  • Signal too high
    • Checking other diagnostic trouble codes (DTCs), engine control module (ECM)
    • Checking the status
    • Checking components and wiring
    • Fault-tracing information - quick test does not start
    • Fault-tracing information - test result: FAULT FOUND
    • Intermittent fault
    • Leakage
      • Checking other diagnostic trouble codes (DTCs)
      • Checking the status
      • Checking components
      • Activating the quick test of the fuel tank system
      • Checking the EVAP canister purge valve
      • Replacing the component
      • Checking the fuel tank system
      • Safety regulations for handling fuel
      • Fault-tracing information:
      • Intermittent fault
    • Verification
      • Verification
    • Information
      • Fault-tracing information
    • Information - intermittent fault
      • Fault-tracing information
• ECM-431D: Leak Diagnostic Unit. Signal Too High (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Fault-tracing
• ECM-431D: Leak Diagnostic Unit. Signal Too Low (B5244T3; 2002)
  • Diagnostic trouble code (DTC) information
  • Signal too low
    • Checking other diagnostic trouble codes (DTCs), engine control module (ECM)
    • Checking the status
    • Checking components and wiring
    • Fault-tracing information - quick test does not start
    • Fault-tracing information - test result: FAULT FOUND
    • Intermittent fault
    • Leakage
      • Checking other diagnostic trouble codes (DTCs)
      • Checking the status
      • Checking components
      • Activating the quick test of the fuel tank system
      • Checking the EVAP canister purge valve
      • Replacing the component
      • Checking the fuel tank system
      • Fault-tracing information:
      • Intermittent fault
    • Verification
      • Verification
    • Information
      • Fault-tracing information
    • Information - intermittent fault
      • Fault-tracing information
• ECM-431D: Leak Diagnostic Unit. Signal Too Low (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Fault-tracing
• ECM-432B: Leak Diagnostic Unit, Valve. Signal Missing (B5254T2; 2005-2007)
  • Diagnostic trouble code (DTC) information ECM-432B
  • Signal missing
• ECM-432C: Leak Diagnostic Unit, Preheating. Signal Too High (B5254T2; 2005-2007)
  • Diagnostic trouble code (DTC) information ECM-432C
  • Signal too high
• ECM-432D: Leak Diagnostic Unit, Preheating. Signal Too Low (B5254T2; 2005-2007)
  • Diagnostic trouble code (DTC) information ECM-432D
  • Signal too low
    • Checking the status
    • Checking components and wiring
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-4338: Fuel Tank Filler Cap Missing (B5244T3; 2001)
  • Diagnostic trouble code (DTC) information
  • Fault-tracing information
• ECM-4338: Fuel Tank Filler Cap Missing (B5244T3; 2002)
  • Diagnostic trouble code (DTC) information
  • Fault-tracing information
• ECM-4338: Fuel Tank Filler Cap Missing (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Fault-tracing information
• ECM-433B: Leak Diagnostic Unit, Pump. Signal Missing (B5254T2; 2005-2007)
  • Diagnostic trouble code (DTC) information ECM-433B
  • Signal missing
• ECM-433C: Leak Diagnostic Unit, Pump. Signal Too High (B5254T2; 2005-2007)
  • Diagnostic trouble code (DTC) information ECM-433C
  • Signal too high
• ECM-433D: Leak Diagnostic Unit, Pump. Signal Too Low (B5254T2; 2005-2007)
  • Diagnostic trouble code (DTC) information ECM-433D
  • Signal too low
• ECM-434C: Fuel Tank System, Leakage. Minor Leak (B5254T2; 2005-2007)
  • Diagnostic trouble code (DTC) information ECM-434C
  • Leakage
    • Checking software
    • Perform quick-test tank system
    • Description of parameters, quick test of the fuel tank system
      • Conditions
        • ECU-power: supply (V)
        • Atmospheric pressure (Pa)
        • Fuel level (l)
        • Ambient temperature (°C)
      • Test status
        • Fuel tank system quick test
        • Test phase
        • Fuel tank pressure (Pa)
      • Test result
        • DMTL, test result
        • Tank system, test result
        • Estimated leak (mm)
    • Test phases, quick test fuel tank system
      • Reference
      • Major leak
      • Minor leak
      • Not-in: progress
    • DMTL, test result = "Problem found"
    • Tank system, test result = "No leakage found"
    • Tank system, test result = "Minor leakage found"
    • DMTL, test result and Tank system, test result = "Unknown"
    • Tank system, test result = "Major leakage found"
• ECM-4360: Leak Diagnostic Unit. Faulty Signal (B5254T2; 2005-2007)
  • Diagnostic trouble code (DTC) information ECM-4360
  • Fault-tracing
    • Checking software
    • Perform quick-test tank system
    • DMTL, test result = "Problem found"
    • Tank system, test result = "No leakage found"
    • Tank system, test result = "Major leakage found" or "Minor leakage found"
    • DMTL, test result and Tank system, test result = "Unknown"
    • Fault-tracing
      • Checking software
      • Perform quick-test tank system
        • Overview
        • Notes
        • Test phases, quick test fuel tank system
        • Signal specification
      • DMTL, test result = "Problem found"
      • Tank system, test result = "No leakage found"
      • Tank system, test result = "Major leakage found" or "Minor leakage found"
      • DMTL, test result and Tank system, test result = "Unknown"
• ECM-436B: Leak Diagnostic Unit. Signal Missing (B5254T2; 2005-2007)
  • Diagnostic trouble code (DTC) information ECM-436B
  • Fault-tracing
• ECM-436C: Leak Diagnostic Unit. Signal Too High (B5254T2; 2005-2007)
  • Diagnostic trouble code (DTC) information ECM-436C
  • Fault-tracing
• ECM-436D: Leak Diagnostic Unit. Signal Too Low (B5254T2; 2005-2007)
  • Diagnostic trouble code (DTC) information ECM-436D
  • Fault-tracing
• ECM-4380: Fuel Tank Filler Cap. Missing (B5254T2; 2005-2007)
  • Diagnostic trouble code (DTC) information ECM-4380
  • Fault-tracing information
• ECM-439C: Fuel Tank System, Leakage. Major Leak (B5254T2; 2005-2007)
  • Diagnostic trouble code (DTC) information ECM-439C
  • Leakage
• ECM-4400: Fuel Level Sensor. Faulty Signal (B5254T2; 2005-2006)
  • Diagnostic trouble code (DTC) information ECM-4400
  • Fault-tracing information
• ECM-440B: Fuel Level Sensor. Signal Missing (B5254T2; 2005-2006)
  • Diagnostic trouble code (DTC) information ECM-440B
  • Fault-tracing information
    • Information
    • General information about fault-tracing in the CAN network
• ECM-440C: Fuel Level Sensor. Signal Too High (B5254T2; 2005-2006)
  • Diagnostic trouble code (DTC) information ECM-440C
  • Fault-tracing information
• ECM-440D: Fuel Level Sensor. Signal Too Low (B5254T2; 2005-2007)
  • Diagnostic trouble code (DTC) information ECM-440D
  • Fault-tracing information
• ECM-4420: Fuel Level Sensor. Faulty Signal (B5254T2; 2006-2007)
  • Diagnostic trouble code (DTC) informationECM-4420
  • Fault-tracing information
• ECM-443B: Fuel Level Sensor. Signal Too Low (B5254T2; 2006-2007)
  • Diagnostic trouble code (DTC) informationECM-443B
  • Fault-tracing information
• ECM-443C: Fuel Level Sensor. Signal Too High (B5254T2; 2006-2007)
  • Diagnostic trouble code (DTC) informationECM-443C
  • Fault-tracing information
• ECM-443D: Fuel Level Sensor. Signal Missing (B5254T2; 2006-2007)
  • Diagnostic trouble code (DTC) informationECM-443D
  • Fault-tracing information
• ECM-4801: Three-Way Catalytic Converter (TWC) Efficiency. Intermittent Fault (B5244T3; 2001-2002)
  • Diagnostic trouble code (DTC) information
  • Intermittent fault
    • Fault-tracing information
    • Information
      • Fault-tracing information
• ECM-4801: Three-Way Catalytic Converter (TWC) Efficiency. Intermittent Fault (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Intermittent fault
• ECM-4801: Three-Way Catalytic Converter (TWC) Efficiency. Permanent Fault (B5244T3; 2001-2002)
  • Diagnostic trouble code (DTC) information
  • Permanent fault
    • Checking for air leakage in the intake system
      • Notes
      • Check for air leaks in the intake system
        • Preparations
        • Connecting
        • Check
    • Checking for air leakage in the exhaust system
      • Notes
      • Checking for air leakage in the exhaust system
      • Checking for air leakage in the exhaust system (2000-)
        • Notes
        • Preparatory work
        • Cleaning and checking
        • Finishing
      • Checking for air leakage in the exhaust system (1999)
        • Notes
        • Engagement
        • Check
    • Checking fuel and residual pressures
    • Checking the compression
    • Compression test
      • Notes
      • Ignition system
      • Conditions
      • Preparations
      • Compression testing
      • Install
      • Erase diagnostic trouble codes (DTCs) and check
    • Replacing the component
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-4801: Three-Way Catalytic Converter (TWC) Efficiency. Permanent Fault (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Permanent fault
• ECM-5000: Air Conditioning (A/C) Pressure Sensor. Signal Missing. Intermittent Fault (B5244T3; 2001-2002)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Intermittent fault
    • Information
• ECM-5000: Air Conditioning (A/C) Pressure Sensor. Signal Missing. Intermittent Fault (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Intermittent fault
• ECM-5000: Air Conditioning (A/C) Pressure Sensor. Signal Missing. Permanent Fault (B5244T3; 2001-2002)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Permanent fault
    • Checking component and wiring
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-5000: Air Conditioning (A/C) Pressure Sensor. Signal Missing. Permanent Fault (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Permanent fault
• ECM-5000: Air Conditioning (A/C) Pressure Sensor. Signal Too High. Intermittent Fault (B5244T3; 2001-2002)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Intermittent fault
    • Checking component and wiring
    • Information
      • Fault-tracing information
• ECM-5000: Air Conditioning (A/C) Pressure Sensor. Signal Too High. Intermittent Fault (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Intermittent fault
• ECM-5000: Air Conditioning (A/C) Pressure Sensor. Signal Too High. Permanent Fault (B5244T3; 2001-2002)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Permanent fault
    • Checking component and wiring
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-5000: Air Conditioning (A/C) Pressure Sensor. Signal Too High. Permanent Fault (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Permanent fault
• ECM-5000: Air Conditioning (A/C) Pressure Sensor. Signal Too Low. Intermittent Fault (B5244T3; 2001-2002)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Intermittent fault
    • Checking component and wiring
    • Information
      • Fault-tracing information
• ECM-5000: Air Conditioning (A/C) Pressure Sensor. Signal Too Low. Intermittent Fault (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Intermittent fault
• ECM-5000: Air Conditioning (A/C) Pressure Sensor. Signal Too Low. Permanent Fault (B5244T3; 2001-2002)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Permanent fault
    • Checking component and wiring
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-5000: Air Conditioning (A/C) Pressure Sensor. Signal Too Low. Permanent Fault (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Permanent fault
• ECM-5000: Engine Speed (Rpm) Sensor Signal. Faulty Signal (B5254T2; 2005-2007)
  • Diagnostic trouble code (DTC) information ECM-5000
  • Faulty signal
    • Checking components
    • Engine speed (RPM) sensor, replacing
      • Notes
      • Removal
        • Removing the air cleaner (ACL)
        • Removing the engine speed (RPM) sensor
      • Installation
        • Notes
        • Installing the engine speed (RPM) sensor
        • Installing the air cleaner (ACL)
        • Finishing
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-500B: Engine Speed (Rpm) Sensor Signal. Signal Missing (B5254T2; 2005-2007)
  • Diagnostic trouble code (DTC) information ECM-500B
  • Signal missing
    • Checking components and wiring
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-500C: Engine Speed (Rpm) Sensor Signal. Signal Too High (B5254T2; 2005-2007)
  • Diagnostic trouble code (DTC) information ECM-500C
  • Signal too high
    • Checking the component and wiring
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-500D: Engine Speed (Rpm) Sensor Signal. Signal Too Low (B5254T2; 2005-2007)
  • Diagnostic trouble code (DTC) information ECM-500D
  • Signal too low
    • Checking components
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-5100: Malfunction Indicator Lamp (Mil), TCM. Faulty Signal (B5254T2; 2005-2007)
  • Diagnostic trouble code (DTC) information ECM-5100
  • Fault-tracing information
    • Information
• ECM-510F: Vehicle Speed Signal (B5244T3; 2001-2002)
  • Diagnostic trouble code (DTC) information
  • Fault-tracing information
• ECM-510F: Vehicle Speed Signal (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Fault-tracing information
• ECM-5110: Malfunction Indicator Lamp (Mil), CEM. Faulty Signal (B5254T2; 2005-2007)
  • Diagnostic trouble code (DTC) information ECM-5110
  • Fault-tracing information
• ECM-512B: Malfunction Indicator Lamp (Mil) Communication. Signal Missing (B5254T2; 2005-2007)
  • Diagnostic trouble code (DTC) information ECM-512B
  • Fault-tracing information
• ECM-5130: Malfunction Indicator Lamp (Mil) Control Module Transmission (TCM). Faulty Signal (B5254T2; 2005-2007)
  • Diagnostic trouble code (DTC) information ECM-5130
  • Fault-tracing information
• ECM-513B: Malfunction Indicator Lamp (Mil), Transmission Control Module (TCM). Signal Missing (B5254T2; 2005-2006)
  • Diagnostic trouble code (DTC) information ECM-513B
  • Fault-tracing information
• ECM-5200: Engine Speed (Rpm) Sensor. Faulty Signal (B5244T3; 2002)
  • Diagnostic trouble code (DTC) information
  • Faulty signal
    • Checking components
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-5200: Engine Speed (Rpm) Sensor. Faulty Signal (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Faulty signal
• ECM-5200: Engine Speed (Rpm) Sensor. Signal Missing (B5244T3; 2002)
  • Diagnostic trouble code (DTC) information
  • Signal missing
    • Checking interference to the engine speed (RPM) sensor
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-5200: Engine Speed (Rpm) Sensor. Signal Missing (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal missing
• ECM-5200: Engine Speed (Rpm) Sensor. Signal Too High (B5244T3; 2002)
  • Diagnostic trouble code (DTC) information
  • Signal too high
    • Checking interference
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-5200: Engine Speed (Rpm) Sensor. Signal Too High (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high
• ECM-5200: Engine Speed (Rpm) Sensor. Signal Too Low (B5244T3; 2002)
  • Diagnostic trouble code (DTC) information
  • Signal too low
    • Checking components
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-5200: Engine Speed (Rpm) Sensor. Signal Too Low (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too low
• ECM-5200: Air Conditioning (A/C) Pressure Sensor. Faulty Signal (B5254T2; 2005-2007)
  • Diagnostic trouble code (DTC) information ECM-5200
  • Fault-tracing information
• ECM-520B: Air Conditioning (A/C) Pressure Sensor. Signal Missing (B5254T2; 2005-2007)
  • Diagnostic trouble code (DTC) information ECM-520B
  • Signal missing. Permanent fault
• ECM-520C: Air Conditioning (A/C) Pressure Sensor. Signal Too High (B5254T2; 2005-2007)
  • Diagnostic trouble code (DTC) information ECM-520C
  • Signal too high. Permanent fault
• ECM-520D: Air Conditioning (A/C) Pressure Sensor. Signal Too Low (B5254T2; 2005-2007)
  • Diagnostic trouble code (DTC) information ECM-520D
  • Signal too low. Permanent fault
• ECM-5300: Vehicle Speed Signal. Faulty Signal (B5254T2; 2005-2007)
  • Diagnostic trouble code (DTC) information ECM-5300
  • Faulty signal
    • Programming/replacing the engine control module (ECM)
    • Information
      • Fault-tracing information
• ECM-530B: Control Module Communication (B5244T3; 2001-2002)
  • Diagnostic trouble code (DTC) information
  • Fault-tracing information
• ECM-530B: Control Module Communication (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Fault-tracing information
• ECM-530B: Vehicle Speed Signal. Signal Missing (B5254T2; 2005-2006)
  • Diagnostic trouble code (DTC) information ECM-530B
  • Fault-tracing information
• ECM-530C: Speed Signal. Signal Too High (B5254T2; 2005-2007)
  • Diagnostic trouble code (DTC) information ECM-530C
  • Fault-tracing information
• ECM-530D: Diagnostic Trouble Code (DTC) In Another Control Module (B5244T3; 2001-2002)
  • Diagnostic trouble code (DTC) information
  • Fault-tracing information
• ECM-530D: Diagnostic Trouble Code (DTC) In Another Control Module (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Fault-tracing information
• ECM-530D: Speed Signal. Signal Too Low (B5254T2; 2005-2007)
  • Diagnostic trouble code (DTC) information ECM-530D
  • Fault-tracing information
• ECM-531D: Control Module, Internal Fault (B5244T3; 2001-2002)
  • Diagnostic trouble code (DTC) information
  • Fault-tracing information
• ECM-531D: Control Module, Internal Fault (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Fault-tracing information
• ECM-540B: Oil Grade, Level And Temperature Sensor. Faulty Signal (B5254T2; 2005-2007)
  • Diagnostic trouble code (DTC) information ECM-540B
  • Faulty signal
    • Checking the status
    • Checking connectors and wiring
    • Oil-level: sensor, replacing
      • Notes
      • Removal and Installation
        • Removing the oil level sensor
        • Installing the oil level sensor
        • Finishing
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-540C: Oil Grade, Level And Temperature Sensor. Signal Too High (B5254T2; 2005-2007)
  • Diagnostic trouble code (DTC) information ECM-540C
  • Signal too high
    • Checking the status
    • Checking the wiring
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-540D: Oil Grade, Level And Temperature Sensor. Signal Too Low (B5254T2; 2005-2007)
  • Diagnostic trouble code (DTC) information ECM-540D
  • Signal too low
    • Checking the status
    • Checking the wiring
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-5500: Oil Level. Faulty Signal (B5254T2; 2005-2007)
  • Diagnostic trouble code (DTC) information ECM-5500
  • Faulty signal
    • Checking for oil leakage and replacing the component
      • Notes
      • Verification
    • Information
      • Fault-tracing information
• ECM-550D: Oil Level. Signal Too Low (B5254T2; 2005-2007)
  • Diagnostic trouble code (DTC) information ECM-550D
  • Signal too low
    • Checking the oil level and replacing the component
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-6000: Air Conditioning (A/C) Relay Signal. Signal Missing. Intermittent Fault (B5244T3; 2001-2002)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Intermittent fault
    • Checking wiring and connectors
    • Information
      • Fault-tracing information
• ECM-6000: Air Conditioning (A/C) Relay Signal. Signal Missing. Intermittent Fault (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Intermittent fault
• ECM-6000: Air Conditioning (A/C) Relay Signal. Signal Missing. Permanent Fault (B5244T3; 2001-2002)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Permanent fault
    • Checking the connector
    • Checking components and wiring
      • Notes
      • Verification
    • Information
      • Fault-tracing information
• ECM-6000: Air Conditioning (A/C) Relay Signal. Signal Missing. Permanent Fault (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Permanent fault
• ECM-6000: Air Conditioning (A/C) Relay Signal. Signal Too High. Intermittent Fault (B5244T3; 2001-2002)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Intermittent fault
    • Checking the wiring
    • Information
      • Fault-tracing information
• ECM-6000: Air Conditioning (A/C) Relay Signal. Signal Too High. Intermittent Fault (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Intermittent fault
• ECM-6000: Air Conditioning (A/C) Relay Signal. Signal Too High. Permanent Fault (B5244T3; 2001-2002)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Permanent fault
    • Checking components and wiring
      • Notes
      • Verification
    • Information
      • Fault-tracing information
• ECM-6000: Air Conditioning (A/C) Relay Signal. Signal Too High. Permanent Fault (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Permanent fault
• ECM-6000: Air Conditioning (A/C) Relay Signal. Signal Too Low. Intermittent Fault (B5244T3; 2001-2002)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Intermittent fault
    • Checking the wiring
    • Information
      • Fault-tracing information
• ECM-6000: Air Conditioning (A/C) Relay Signal. Signal Too Low. Intermittent Fault (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Intermittent fault
• ECM-6000: Air Conditioning (A/C) Relay Signal. Signal Too Low. Permanent Fault (B5244T3; 2001-2002)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Permanent fault
    • Checking components and wiring
      • Notes
      • Verification
    • Information
      • Fault-tracing information
• ECM-6000: Air Conditioning (A/C) Relay Signal. Signal Too Low. Permanent Fault (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Permanent fault
• ECM-600B: Turbocharger (TC) Control Valve. Signal Missing. Intermittent Fault (B5254T2; 2005-2007)
  • Diagnostic trouble code (DTC) information ECM-600B
  • Signal missing. Intermittent fault
    • Checking the component, wiring and connector
    • Information
      • Fault-tracing information
• ECM-600B: Turbocharger (TC) Control Valve. Signal Missing. Permanent Fault (B5254T2; 2005-2007)
  • Diagnostic trouble code (DTC) information ECM-600B
  • Signal missing. Permanent fault
    • Checking connector
    • Checking component and wiring
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-600C: Turbocharger (TC) Control Valve. Signal Too High. Intermittent Fault (B5254T2; 2005-2007)
  • Diagnostic trouble code (DTC) information ECM-600C
  • Signal too high. Intermittent fault
    • Checking component and wiring
    • Information
      • Fault-tracing information
• ECM-600C: Turbocharger (TC) Control Valve. Signal Too High. Permanent Fault (B5254T2; 2005-2007)
  • Diagnostic trouble code (DTC) information ECM-600C
  • Signal too high. Permanent fault
    • Checking component and wiring
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-600D: Turbocharger (TC) Control Valve. Signal Too Low. Intermittent Fault (B5254T2; 2005-2007)
  • Diagnostic trouble code (DTC) information ECM-600D
  • Signal too low. Intermittent fault
    • Checking component and wiring
    • Information
      • Fault-tracing information
• ECM-600D: Turbocharger (TC) Control Valve. Signal Too Low. Permanent Fault (B5254T2; 2005-2007)
  • Diagnostic trouble code (DTC) information ECM-600D
  • Signal too low. Permanent fault
    • Checking component and wiring
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-601C: Turbocharger (TC) Control System, Boost Pressure Fault. Signal Too High (B5254T2; 2005-2007)
  • Diagnostic trouble code (DTC) information ECM-601C
  • Signal too high
    • Checking hoses and the turbocharger (TC) control valve
    • Pressure regulator, checking/adjusting
      • Notes
      • Checking / setting turbo1 pressure regulator
        • Preparation
        • Connecting test equipment
        • Checking and adjusting push rod
        • Finishing
      • Checking / setting turbo2 pressure regulator
        • Preparation
        • Connecting test equipment
        • Checking and adjusting push rod
        • Finishing
        • Function test
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-602D: Turbocharger (TC) Control System, Flow Fault. Signal Too Low (B5254T2; 2005-2007)
  • Signal too low
    • Checking for air leakage
    • Checking hoses and the turbocharger (TC) control valve
    • Verification
      • Verification
    • Information
      • Fault-tracing information
  • Diagnostic trouble code (DTC) information ECM-602D
• ECM-6100: Engine Cooling Fan (FC) Control Module. Faulty Signal (B5254T2; 2004)
  • Diagnostic trouble code (DTC) information ECM-6100
  • Faulty signal
    • Checking the component
    • Checking the component and wiring
    • Replacing a component
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-6100: Engine Cooling Fan (FC) Control Module. Signal Missing (B5254T2; 2004)
  • Diagnostic trouble code (DTC) information ECM-6100
  • Signal missing
    • Checking the component
    • Checking the component and wiring
    • Replacing a component
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-6100: Engine Cooling Fan (FC) Control Module. Signal Too High (B5254T2; 2004)
  • Diagnostic trouble code (DTC) information ECM-6100
  • Signal too high
    • Checking the component
    • Checking the component and wiring
    • Replacing a component
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-6100: Engine Cooling Fan (FC) Control Module. Signal Too Low (B5254T2; 2004)
  • Diagnostic trouble code (DTC) information ECM-6100
  • Signal too low
    • Checking the component
    • Checking components and wiring
    • Replacing a component
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-6100: Engine Cooling Fan Control Module. Faulty Signal. Intermittent Fault (B5244T3; 2001-2002)
  • Diagnostic trouble code (DTC) information
  • Faulty signal. Intermittent fault
    • Checking component and wiring
    • Information
      • Fault-tracing information
• ECM-6100: Engine Cooling Fan Control Module. Faulty Signal. Intermittent Fault (B5254T2; 2003)
  • Diagnostic trouble code (DTC) information
  • Faulty signal. Intermittent fault
• ECM-6100: Engine Cooling Fan Control Module. Faulty Signal. Permanent Fault (B5244T3; 2001-2002)
  • Diagnostic trouble code (DTC) information
  • Faulty signal. Permanent fault
    • Checking the component
    • Checking component
    • Replacing a component
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-6100: Engine Cooling Fan Control Module. Faulty Signal. Permanent Fault (B5254T2; 2003)
  • Diagnostic trouble code (DTC) information
  • Faulty signal. Permanent fault
• ECM-6110: Camshaft Position Control, Intake. Slow (B5254T2; 2005-2007)
  • Diagnostic trouble code (DTC) information ECM-6110
  • Slow/Faulty
    • Checking the status
    • Checking components
    • VVT solenoid, inspection and cleaning
      • Inspection
      • VVT solenoid, cleaning
      • Testing
    • Replacing the variable valve timing solenoid
      • Notes
      • Preparations
      • Removing the variable valve timing solenoid
      • Installing the variable valve timing solenoid
      • Finishing
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-6110: Electric Cooling Fan Relay. No Signal. Intermittent Fault (B5244T3; 2001-2002)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Intermittent fault
    • Checking components and wiring
    • Information
      • Fault-tracing information
• ECM-6110: Electric Cooling Fan Relay. No Signal. Intermittent Fault (B5254T2; 2003)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Intermittent fault
• ECM-6110: Electric Cooling Fan Relay. No Signal. Permanent Fault (B5244T3; 2001-2002)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Permanent fault
    • Checking the component
    • Checking components and wiring
      • Notes
      • Signal specification (B5204T5, B5234T3, B5234T7 and B5244T3 -2004)
      • Signal specification (B5254T4 2004)
    • Replacing engine cooling fan control module
    • Verification
    • Information
      • Fault-tracing information