Explanation Of Dimensions

Fig 1: Body Dimension Measuring Point Symbols

Courtesy of VOLVO CARS CORPORATION

The dimensions in the table are listed as follows:

Symbol number 1 means that the measurement is taken from the center.

Symbol number 2 means that the measurement is taken from one edge.

Courtesy of VOLVO CARS CORPORATION

Symbol number 3 means that the measurement is taken from a cut mark. Measurements are taken from the bottom of the recess as shown.

If only one measuring point symbol is displayed, the symbol applies to both measuring points. Otherwise the symbols are shown on each side of the dimension shown.

Fig 2: Windshield Opening Measurement Locations (1 Of 3)

Courtesy of VOLVO CARS CORPORATION

C1 = 1125 mm

C2 = 1445 mm

C3 = 1368 mm

C4 = 1479 mm

Fig 3: Windshield Opening Measurement Locations (2 Of 3)

Courtesy of VOLVO CARS CORPORATION

Fig 4: Windshield Opening Measurement Locations (3 Of 3)

Courtesy of VOLVO CARS CORPORATION