Checking The Wiring And Component

Check the cable between transmission control module (TCM) terminal #A13 (#A43) and gear selector module (GSM) terminal #3. Check for a short-circuit to supply voltage.

HINT: With the ignition switched on, the voltage with the gear selector in position N should be 0 V. With the gear selector in position R or D it should be U _bat  . 

Other information 

• see CONNECTING THE BREAKOUT BOX
• see TRANSMISSION CONTROL MODULE (TCM) (2006-2007), TRANSMISSION CONTROL MODULE (TCM) (2008-2011) or TRANSMISSION CONTROL MODULE (TCM) (2012)
• see SIGNAL SPECIFICATION
• see CONTENTS

Fig 2: Identifying Connector Terminals

Courtesy of VOLVO CARS CORPORATION

Fig 3: Identifying Voltage Display

Courtesy of VOLVO CARS CORPORATION

Refer to VERIFICATION