Section 195 (Control Module And Sensors For Abs And Stability/Traction Control - Removal And Installation)
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
- Anti-Lock/Traction Control
- Active yaw control sensor, replacing
- Contact reel / steering wheel angle sensor, replacing
- Notes
- Removal
- Preparations
- Removing steering wheel module
- Removing the center screw from the steering wheel
- Locking the contact reel
- Marking the position of the steering wheel
- Removing the steering wheel
- Removing steering column covers
- Removing the contact reel and steering wheel angle sensor
- Resetting the contact reel and steering wheel angle sensor (Only to be carried out when the default position has been changed)
- Checking the locking screw
- Installation
- Control module for ABS and dynamic stability and traction control (DSTC), replacing
- Test driving
- Yaw rate sensor (1) and the lateral acceleration sensor in the center console (DSTC), replacing
- Yaw rate sensor (2) (DSTC), replacing