Engine Control Module (ECM) Diagnostic Trouble Codes (XC) - 7 Of 9

• ECM-6B00: Malfunction Indicator Lamp (Mil) Signal. Signal Too Low. Permanent Fault (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Permanent fault
    • Checking component and wiring
      • Notes
      • Signal specification (B5204T5, B5234T3, B5234T7 and B5244T3 -2004)
      • Signal specification (B5254T4 2004)
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-700C: Engine Control Module (ECM), Internal Fault. Signal Too High (B5254T2; 2005-2007)
  • Diagnostic trouble code (DTC) information
  • Internal fault
• ECM-700D: Engine Control Module (ECM), Internal Fault. Signal Too Low (B5254T2; 2005-2007)
  • Diagnostic trouble code (DTC) information
  • Internal fault
• ECM-7010: Engine Control Module (ECM), High Temperature. Faulty Signal (B5254T2; 2005-2007)
  • Diagnostic trouble code (DTC) information ECM-7010
  • Faulty signal
    • Checking the component
    • Information
      • Fault-tracing information
• ECM-7020: Engine Control Module (ECM), High Temperature. Faulty Signal (B5254T2; 2005-2007)
  • Diagnostic trouble code (DTC) information ECM-7020
  • Faulty signal
• ECM-7100: Immobilizer Communication. Faulty Signal (B5254T2; 2005-2007)
  • Diagnostic trouble code (DTC) information ECM-7100
  • Faulty signal. Permanent fault
    • Information
      • Overview
      • Fault-tracing information
    • Verification
• ECM-710A: Real Time Clock (B5244T3; 2001)
  • Diagnostic trouble code (DTC) information
  • Fault-tracing information
• ECM-710B: Immobilizer Communication. Signal Missing (B5254T2; 2005-2007)
  • Diagnostic trouble code (DTC) information ECM-710B
  • Signal missing. Permanent fault
    • Checking the component
    • Information
      • Fault-tracing information
• ECM-711A: Engine Control Module (ECM), Internal Fault. Signal Too High / Signal Too Low. Intermittent Fault (B5244T3; 2002)
  • Diagnostic trouble code (DTC) information
  • Signal too high/signal too low. Intermittent fault
• ECM-711A: Engine Control Module (ECM), Internal Fault. Signal Too High / Signal Too Low. Intermittent Fault (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high/signal too low. Intermittent fault
• ECM-711A: Engine Control Module (ECM), Internal Fault. Signal Too High / Signal Too Low. Permanent Fault (B5244T3; 2002)
  • Diagnostic trouble code (DTC) information
  • Signal too high/signal too low. Permanent fault
• ECM-711A: Engine Control Module (ECM), Internal Fault. Signal Too High / Signal Too Low. Permanent Fault (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high/signal too low. Permanent fault
• ECM-715D: Engine Control Module (ECM), Temperature Too High (B5244T3; 2002)
  • Diagnostic trouble code (DTC) information
  • Faulty signal
    • Checking the component
    • Information
      • Fault-tracing information
• ECM-715D: Engine Control Module (ECM), Temperature Too High (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Faulty signal
• ECM-715D: Temperature Sensor Control Module (B5244T3; 2001)
  • Diagnostic trouble code (DTC) information
  • Fault-tracing information
• ECM-716D: Engine Control Module (ECM), Temperature Too High (B5244T3; 2002)
  • Diagnostic trouble code (DTC) information
  • Faulty signal
• ECM-716D: Engine Control Module (ECM), Temperature Too High (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Faulty signal
• ECM-716D: Temperature Sensor Control Module (B5244T3; 2001)
  • Diagnostic trouble code (DTC) information
  • Fault-tracing information
• ECM-7180: Temperature Sensor Control Module. Signal Too High/Signal Too Low. Intermittent Fault (B5244T3; 2001-2002)
  • Diagnostic trouble code (DTC) information
  • Signal too high/signal too low. Intermittent fault
• ECM-7180: Temperature Sensor Control Module. Signal Too High/Signal Too Low. Intermittent Fault (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high/signal too low. Intermittent fault
• ECM-7180: Temperature Sensor Control Module. Signal Too High/Signal Too Low. Permanent Fault (B5244T3; 2001-2002)
  • Diagnostic trouble code (DTC) information
  • Signal too high/signal too low. Permanent fault
• ECM-7180: Temperature Sensor Control Module. Signal Too High/Signal Too Low. Permanent Fault (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high/signal too low. Permanent fault
• ECM-720A: Immobilizer Communication. Faulty Signal. Intermittent Fault (B5244T3; 2001-2002)
  • Diagnostic trouble code (DTC) information
  • Faulty signal. Intermittent fault
    • Checking components and wiring
    • Information
      • Fault-tracing information
• ECM-720A: Immobilizer Communication. Faulty Signal. Intermittent Fault (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Faulty signal. Intermittent fault
• ECM-720A: Immobilizer Communication. Faulty Signal. Permanent Fault (B5244T3; 2001-2002)
  • Diagnostic trouble code (DTC) information
  • Faulty signal. Permanent fault
• ECM-720A: Immobilizer Communication. Faulty Signal. Permanent Fault (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Faulty signal. Permanent fault
• ECM-720A: Immobilizer Communication. Signal Missing. Intermittent Fault (B5244T3; 2001-2002)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Intermittent fault
    • Checking the component
    • Information
      • Fault-tracing information
• ECM-720A: Immobilizer Communication. Signal Missing. Intermittent Fault (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Intermittent fault
• ECM-720A: Immobilizer Communication. Signal Missing. Permanent Fault (B5244T3; 2001-2002)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Permanent fault
• ECM-720A: Immobilizer Communication. Signal Missing. Permanent Fault (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Permanent fault
• ECM-720B: Engine Control Module (ECM) Internal Fault. Signal Missing (B5254T2; 2005-2007)
  • Diagnostic trouble code (DTC) information ECM-720B
  • Internal fault
• ECM-7300: Gear Position Sensor. Faulty Signal (B5254T2; 2005-2007)
  • Diagnostic trouble code (DTC) information ECM-7300
  • Fault-tracing information
• ECM-800B: System Relay. Signal Too Low (B5254T2; 2005-2007)
  • Diagnostic trouble code (DTC) information ECM-800B
  • Signal too low
    • Checking connectors and components
    • Verification
      • Verification
    • Information
      • Fault-tracing information
    • Signal specification
• ECM-8010: Battery Voltage. Faulty Signal (B5244T3; 2002)
  • Diagnostic trouble code (DTC) information
  • Faulty signal
    • Checking the connectors and components
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-8010: Battery Voltage. Faulty Signal (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Faulty signal
• ECM-8010: Battery Voltage. Signal Too High (B5244T3; 2002)
  • Diagnostic trouble code (DTC) information
  • Signal too high
    • Checking the connectors and components
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-8010: Battery Voltage. Signal Too High (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high
• ECM-8010: Battery Voltage. Signal Too Low (B5244T3; 2002)
  • Diagnostic trouble code (DTC) information
  • Signal too low
    • Checking the connectors and components
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-8010: Battery Voltage. Signal Too Low (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too low
• ECM-8010: System Relay Output. Faulty Signal. Intermittent Fault (B5244T3; 2001)
  • Diagnostic trouble code (DTC) information
  • Faulty signal. Intermittent fault
    • Checking wiring
• ECM-8010: System Relay Output. Faulty Signal. Permanent Fault (B5244T3; 2001)
  • Diagnostic trouble code (DTC) information
  • Faulty signal. Permanent fault
    • Checking the cable
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-8010: System Relay Output. Signal Too High. Intermittent Fault (B5244T3; 2001)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Intermittent fault
    • Replacing the component
• ECM-8010: System Relay Output. Signal Too High. Permanent Fault (B5244T3; 2001)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Permanent fault
    • Replacing component
• ECM-8010: System Relay Output. Signal Too Low. Intermittent Fault (B5244T3; 2001)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Intermittent fault
    • Replacing the component
• ECM-8010: System Relay Output. Signal Too Low. Permanent Fault (B5244T3; 2001)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Permanent fault
    • Replacing the component
• ECM-801A: System Relay. Faulty Signal Or Signal Missing (B5244T3; 2002)
  • Diagnostic trouble code (DTC) information
  • Faulty signal or signal missing
    • Checking the connectors and components
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-801A: System Relay. Faulty Signal Or Signal Missing (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Faulty signal or signal missing
• ECM-810C: 5 Volt Power Supply. Signal Too High (B5254T2; 2005-2007)
  • Diagnostic trouble code (DTC) information ECM-810C
  • Fault-tracing information
• ECM-810D: 5 Volt Power Supply. Signal Too Low (B5254T2; 2005-2007)
  • Diagnostic trouble code (DTC) information ECM-810D
  • Signal too low
• ECM-8200: Battery Voltage. Faulty Signal (B5254T2; 2005-2006)
  • Diagnostic trouble code (DTC) information ECM-8200
  • Internal fault
• ECM-820C: Battery Voltage. Signal Too High (B5254T2; 2005-2007)
  • Diagnostic trouble code (DTC) information ECM-820C
  • Signal too high
• ECM-820D: Battery Voltage. Signal Too Low (B5254T2; 2005-2007)
  • Diagnostic trouble code (DTC) information ECM-820D
  • Signal too low
• ECM-8210: System Relay. Faulty Signal (B5254T2; 2005-2006)
  • Diagnostic trouble code (DTC) information ECM-8210
  • Faulty signal or signal missing
• ECM-821B: System Relay. Signal Missing (B5254T2; 2005-2006)
  • Diagnostic trouble code (DTC) information ECM-821B
  • Faulty signal or signal missing
• ECM-8410: 5 Volt Power Supply. Signal Too High. Intermittent Fault (B5244T3; 2001-2002)
  • Diagnostic trouble code (DTC) information ECM-8410
  • Signal too high. Intermittent fault
    • Checking the wiring
    • Mass air flow sensor (MAF), replacing
      • Removing the mass air flow (MAF) sensor
      • Installing the mass air flow (MAF) sensor
    • Information
      • Fault-tracing information
• ECM-8410: 5 Volt Power Supply. Signal Too High. Permanent Fault (B5244T3; 2001-2002)
  • Diagnostic trouble code (DTC) information ECM-8410
  • Signal too high. Permanent fault
    • Checking the wiring
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-8410: 5 Volt Power Supply. Signal Too Low. Intermittent Fault (B5244T3; 2001-2002)
  • Diagnostic trouble code (DTC) information ECM-8410
  • Signal too low. Intermittent fault
    • Checking the wiring
    • Information
      • Fault-tracing information
• ECM-8410: 5 Volt Power Supply. Signal Too Low. Permanent Fault (B5244T3; 2001-2002)
  • Diagnostic trouble code (DTC) information ECM-8410
  • Signal too low. Permanent fault
    • Checking the wiring
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-8410: 5 Volt Power Supply. Signal Too High (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information ECM-8410
  • Signal too high
    • Checking the wiring
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-8410: 5 Volt Power Supply. Signal Too Low (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information ECM-8410
  • Signal too low
    • Checking the wiring
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-9000: Brake Pedal Sensor. Faulty Signal (B5254T2; 2005-2007)
  • Diagnostic trouble code (DTC) information ECM-9000
  • Signal missing or faulty signal
    • Checking the diagnostic trouble codes (DTCs)
    • Checking the status
    • Checking the power supply
    • Checking components and wiring
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-900B: Brake Pedal Sensor. Signal Missing (B5254T2; 2005-2007)
  • Diagnostic trouble code (DTC) information ECM-900B
  • Signal missing or faulty signal
• ECM-900C: Brake Pedal Sensor. Signal Too High (B5254T2; 2005-2007)
  • Diagnostic trouble code (DTC) information ECM-900C
  • Signal too high
    • Checking the diagnostic trouble codes (DTCs)
    • Checking the status
    • Checking the power supply
    • Checking components and wiring
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-901A: Engine Control Module (ECM) Communication. Faulty Communication (B5244T3; 2001)
  • Diagnostic trouble code (DTC) informationECM-901A
    • Notes
    • Identifying upgraded software ECM/ETM
      • Notes
      • USA/Canada market
  • Too-high: signal/signal missing/too low signal.
    • Checking the wiring and components
    • Faulty communication
      • General information
      • Checking the resistance of the control area network (CAN) cables
      • Checking a short-circuit in CAN cables
      • Checking the traffic load on the CAN cables
      • Identifying fault causes in the CAN network
      • Identifying a control module in the CAN network
      • Verification
    • Information - intermittent fault
      • Fault-tracing information
    • Information
      • Fault-tracing information
• ECM-901A: Communication Control Module, Communication Problems. Faulty Signal. Permanent Fault-901A Engine Control Module (ECM) Communication. Communication Fault (B5244T3; 2001)
  • Diagnostic trouble code (DTC) informationECM-901A
  • Too-high: signal/signal missing/too low signal.
• ECM-901E: Engine Control Module (ECM). Internal Fault (B5244T3; 2001)
  • Diagnostic trouble code (DTC) informationECM-901E
    • Overview
    • Notes
    • Information about combined diagnostic trouble codes (DTCs) (turbo engines)
  • Faulty signal. Permanent fault
    • Replacing engine control module (ECM) and programming
    • Information
      • Fault-tracing information
  • Faulty signal. Intermittent fault
    • Fault-tracing information
    • Information
      • Fault-tracing information
• ECM-902A: Communication With Throttle Unit. Signal Missing (B5244T3; 2001)
  • Diagnostic trouble code (DTC) information ECM-902A
  • Too-high: signal/signal missing/too low signal.
• ECM-902A: Communication With Throttle Unit. Signal Too High (B5244T3; 2001)
  • Diagnostic trouble code (DTC) information ECM-902A
  • Too-high: signal/signal missing/too low signal.
• ECM-902A: Throttle Unit Communication. Signal Too Low (B5244T3; 2001)
  • Diagnostic trouble code (DTC) information ECM-902A
  • Too-high: signal/signal missing/too low signal.
• ECM-903C: Reconfiguration Emission System. Information (B5244T3; 2001)
  • Diagnostic trouble code (DTC) informationECM-903C
  • Fault-tracing information
• ECM-903C: Throttle Position (TP) Sensor. Faulty Signal (B5244T3; 2002)
  • Diagnostic trouble code (DTC) information
  • Fault-tracing information
• ECM-903C: Throttle Position (TP) Sensor. Faulty Signal (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Fault-tracing information
• ECM-903F: Throttle Position (TP). Signal Too High (B5244T3; 2001)
  • Diagnostic trouble code (DTC) information ECM-903F
  • Signal too high
    • Frozen values and counter for diagnostic trouble codes.
      • Notes
      • Example of use of the frozen values
      • Description of frozen values Me7
        • Explanation
        • Condition, fuel trim bank X:
        • Calculated load, %
        • Engine coolant temperature (ECT), °C
        • Fuel trim, quick adjustment, bank X %
        • Fuel trim, slow adjustment, bank X %
        • Engine speed, RPM
        • Vehicle speed, km/h
        • Boost pressure
        • Battery voltage
        • Throttle angle
        • Air mass
        • Outside temperature
        • Distance
      • Frozen values DENSO, description
        • Diagnostic Trouble Code (DTC)
        • Read off fault type
        • Previous fault type
        • Time before the data was frozen
        • Time after engine start
        • Outside temperature
        • Atmospheric pressure
        • Vehicle speed
        • Engine speed
        • Mass air flow g/stroke
        • Intake pressure
        • Engine coolant temperature (ECT)
        • Lambda compensation
        • Long term fuel trim
        • Accelerator pedal (AP) affected
        • Probe control
        • Fuel shut-off system
        • Operating cycle
        • Warm-up cycle
        • Gear selected
        • Engine cooling fan (FC)
        • A/C requested
        • Air-conditioning: (A/C) compressor active
        • Brake pedal switch
        • EVAP canister purge valve active
        • Cruise control active
        • EVAP canister shut-off valve
        • State, fuel trim
        • Battery voltage
        • Passenger compartment temperature
        • Odometer setting
        • Frozen values dependent on diagnostic trouble codes (DTCs)
    • Fault-tracing information
      • Fault-tracing information
      • Software is not upgraded
      • Software is upgraded
    • Information
      • Fault-tracing information
• ECM-903F: Throttle Position (TP). Signal Too Low/Signal Missing (B5244T3; 2001)
  • Diagnostic trouble code (DTC) information ECM-903F
  • Signal too low or signal missing
    • Frozen values and counter for diagnostic trouble codes.
    • Fault-tracing information
      • Fault-tracing information
      • Software is not upgraded
      • Software is upgraded
    • Throttle body (electronic throttle module (ETM)), replacing (B5254T4 and B5244T5 2004-)
      • Notes
      • Removing the air cleaner (ACL)
      • Removing the electronic throttle module (ETM)
      • Tightening Torques
      • Replacing the electronic throttle module (ETM)
      • Installing the air cleaner (ACL)
      • Finishing
    • Information
      • Fault-tracing information
• ECM-904C: Reconfiguration Emission System. Information (B5244T3; 2001-2002)
  • Diagnostic trouble code (DTC) informationECM-904C
  • Fault-tracing information
    • Information
• ECM-904C: Throttle Position (TP) Sensor 1 And 2. Faulty Signal (B5244T3; 2001-2002)
  • Diagnostic trouble code (DTC) informationECM-904C
  • Fault-tracing information
• ECM-904D: Text Message. Information (B5244T3; 2001-2002)
  • Diagnostic trouble code (DTC) informationECM-904D
  • Fault-tracing information
• ECM-9050: Memory Fault In Ram. Internal Fault. Intermittent Fault (B5244T3; 2002)
  • Diagnostic trouble code (DTC) information
  • Fault-tracing information
    • Fault-tracing information
    • Information
      • Fault-tracing information
• ECM-9050: Memory Fault In Ram. Internal Fault. Intermittent Fault (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Fault-tracing information
• ECM-9050: Memory Fault In Ram. Internal Fault. Permanent Fault (B5244T3; 2002)
  • Diagnostic trouble code (DTC) information
  • Internal fault. Permanent fault
    • Programming or replacing the engine control module (ECM)
    • Information
      • Fault-tracing information
• ECM-9050: Memory Fault In Ram. Internal Fault. Permanent Fault (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Internal fault. Permanent fault
• ECM-9060: Memory Fault In ROM. Internal Fault. Intermittent Fault (B5244T3; 2002)
  • Diagnostic trouble code (DTC) information
  • Fault-tracing information
• ECM-9060: Memory Fault In ROM. Internal Fault. Intermittent Fault (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Fault-tracing information
• ECM-9060: Memory Fault In ROM. Internal Fault. Permanent Fault (B5244T3; 2002)
  • Diagnostic trouble code (DTC) information
  • Internal fault. Permanent fault
• ECM-9060: Memory Fault In ROM. Internal Fault. Permanent Fault (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Internal fault. Permanent fault
• ECM-9070: Engine Control Module (ECM). Internal Fault. Intermittent Fault (B5244T3; 2002)
  • Diagnostic trouble code (DTC) information
  • Fault-tracing information
• ECM-9070: Engine Control Module (ECM). Internal Fault. Intermittent Fault (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Fault-tracing information
• ECM-9070: Engine Control Module (ECM). Internal Fault. Permanent Fault (B5244T3; 2002)
  • Diagnostic trouble code (DTC) information
  • Internal fault. Permanent fault
• ECM-9070: Engine Control Module (ECM). Internal Fault. Permanent Fault (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Internal fault. Permanent fault
• ECM-9100: Clutch Pedal Position Sensor. Faulty Signal (B5254T2; 2005-2007)
  • Diagnostic trouble code (DTC) information ECM-9100
  • Signal missing or faulty signal
    • Checking the status
    • Checking components and wiring
    • Pedal position sensor, clutch, replacing
      • Notes
      • Removing clutch pedal position sensor
      • Installing clutch pedal position sensor
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-9100: Engine Control Module (ECM). Faulty Signal (B5244T3; 2002)
  • Diagnostic trouble code (DTC) information
  • Faulty signal
    • Fault-tracing information
      • Fault-tracing information
      • Checking diagnostic trouble codes (DTCs)
      • Checking components and wiring
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-9100: Engine Control Module (ECM). Faulty Signal (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Faulty signal
• ECM-910B: Clutch Pedal Sensor. Signal Missing (B5254T2; 2005-2006)
  • Diagnostic trouble code (DTC) information ECM-910B
  • Signal missing or faulty signal
• ECM-910C: Clutch Pedal Sensor. Signal Too High (B5254T2; 2005-2007)
  • Diagnostic trouble code (DTC) information ECM-910C
  • Signal too high / Signal too low
    • Checking the status
    • Checking components and wiring
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-910D: Clutch Pedal Sensor. Signal Too Low (B5254T2; 2005-2007)
  • Diagnostic trouble code (DTC) information ECM-910D
  • Signal too high / Signal too low
• ECM-910E: Throttle Valve. Internal Fault (B5244T3; 2001)
  • Diagnostic trouble code (DTC) informationECM-910E
  • Faulty signal. Intermittent fault
    • Fault-tracing information
    • Information
      • Fault-tracing information
  • Faulty signal. Permanent fault
    • Replacing throttle unit and programming
    • Information
      • Fault-tracing information
• ECM-9117: Throttle Unit. Faulty Signal (B5244T3; 2002)
  • Diagnostic trouble code (DTC) information
  • Faulty signal
    • Fault-tracing information
      • Fault-tracing information
      • Checking components and wiring
      • Adaptation of the throttle unit
      • Checking the fault status
      • Replacing the component
      • Throttle body (TB), cleaning (2005- B5244T5)
    • Verification
      • Verification
      • Verification, continued
    • Information
      • Fault-tracing information
• ECM-9117: Throttle Unit. Faulty Signal (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Faulty signal
• ECM-911A: Throttle Unit Communication. Faulty Communication (B5244T3; 2001)
  • Diagnostic trouble code (DTC) informationECM-911A
    • Notes
    • Information about combined diagnostic trouble codes (DTCs) (normally aspirated engines)
  • Too-high: signal/signal missing/too low signal.
• ECM-912A: Communication With The Engine Control Module (ECM). Signal Missing (B5244T3; 2001)
  • Diagnostic trouble code (DTC) informationECM-912A
  • Too-high: signal/signal missing/too low signal.
• ECM-913C: Throttle Unit. Faulty Signal (B5244T3; 2002)
  • Diagnostic trouble code (DTC) information
  • Faulty signal
    • Fault-tracing information
      • Fault-tracing information
      • Checking diagnostic trouble codes (DTCs)
      • Checking the status
      • Checking the connectors and components
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-913C: Throttle Unit. Faulty Signal (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Faulty signal
• ECM-913F: Throttle Position (TP). Non Plausible Request (B5244T3; 2001)
  • Non-plausible: request
    • Checking components
    • Information
      • Fault-tracing information
  • Diagnostic trouble code (DTC) information
• ECM-913F: Throttle Unit. Faulty Signal (B5244T3; 2002)
  • Diagnostic trouble code (DTC) information
  • Faulty signal
• ECM-913F: Throttle Unit. Faulty Signal (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Faulty signal
• ECM-914F: Throttle Position (TP) Sensor 1 And 2. Faulty Signal (B5244T3; 2001)
  • Diagnostic trouble code (DTC) information
  • Fault-tracing information
    • software is not upgraded
    • software is upgraded
    • Fault-tracing information
    • Information
      • Fault-tracing information
• ECM-914F: Throttle Unit. Faulty Signal (B5244T3; 2002)
  • Diagnostic trouble code (DTC) information
  • Faulty signal
• ECM-914F: Throttle Unit. Faulty Signal (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Faulty signal
• ECM-9150: Throttle Position (TP) Sensor 1. Faulty Signal (B5244T3; 2001)
  • Diagnostic trouble code (DTC) information ECM-9150
  • Faulty signal
    • Frozen values and counter for diagnostic trouble codes.
    • Fault-tracing information
      • Fault-tracing information
      • software is not upgraded
      • software is upgraded
    • Information
      • Fault-tracing information
• ECM-9150: Throttle Unit, Potentiometer 1. Faulty Signal (B5244T3; 2002)
  • Diagnostic trouble code (DTC) information
  • Faulty signal
    • Fault-tracing information
      • Fault-tracing information
      • Checking components and wiring
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-9150: Throttle Unit, Potentiometer 1. Faulty Signal (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Faulty signal
• ECM-9150: Throttle Unit, Potentiometer 1. Signal Too High (B5244T3; 2002)
  • Diagnostic trouble code (DTC) information
  • Signal too high
    • Fault-tracing information
      • Fault-tracing information
      • Checking components and wiring
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-9150: Throttle Unit, Potentiometer 1. Signal Too High (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high
• ECM-9150: Throttle Unit, Potentiometer 1. Signal Too Low (B5244T3; 2002)
  • Diagnostic trouble code (DTC) information
  • Signal too low
    • Fault-tracing information
      • Fault-tracing information
      • Checking components and wiring
      • Adaptation of the throttle unit
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-9150: Throttle Unit, Potentiometer 1. Signal Too Low (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too low
• ECM-9160: Throttle Position (TP) Sensor 2. Faulty Signal (B5244T3; 2001)
  • Diagnostic trouble code (DTC) information ECM-9160
  • Faulty signal
    • Frozen values and counter for diagnostic trouble codes.
    • Information
      • Fault-tracing information
    • Fault-tracing information
      • Fault-tracing information
      • software is not upgraded
      • software is upgraded