Removal & Installation
WARNING: This page is about the S80 T-6, which is a different variant/trim than selected.
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| In-Line6,AWD | 11.1 | C | ||
| Combination Procedure: CRANKSHAFT MAIN OIL SEAL: Remove & Replace: | ||||
| Rear | 0.6 | B | ||
| Combination Procedure: FLYWHEEL: Remove & Replace: | ||||
| 0.3 | C | |||
| Combination Procedure: OIL PUMP SEAL: Remove & Replace: | ||||
| Front | 0.4 | B | ||
| Combination Procedure: TORQUE CONVERTER: Remove & Replace: | ||||
| 0.2 | C | |||
| Combination Procedure: TRANSAXLE ASSEMBLY: Replace: | ||||
| 0.6 | C | |||