Fuel Pump Driver Module (V8): Removal

NOTE: Removal steps in this procedure may contain installation details.

Perform draining. See FUEL TANK DRAINING

Remove the front muffler. See MUFFLER, FRONT

Fig 1: Removing Underbody Panels

Courtesy of VOLVO CARS CORPORATION

Remove the propeller shaft. See PROPELLER SHAFT

Fig 2: Identifying Protective Support Bracket

Courtesy of VOLVO CARS CORPORATION

Torque: M8

24 Nm

Fig 3: Identifying Compartment Casing Cover

Courtesy of VOLVO CARS CORPORATION

Fig 4: Identifying Cable Connection Locations

Courtesy of VOLVO CARS CORPORATION

Fig 5: Identifying Connections

Courtesy of VOLVO CARS CORPORATION

WARNING: Fuel may still be present in the fuel tank after draining.

WARNING: Be prepared to collect escaping fluid.

Fig 6: Identifying Fuel Tank

Courtesy of VOLVO CARS CORPORATION

Fig 7: Identifying Fuel Tank Retaining Straps

Courtesy of VOLVO CARS CORPORATION

Torque: M8

24 Nm

Fig 8: Identifying Fuel Pump Driver Module

Courtesy of VOLVO CARS CORPORATION

NOTE: Make sure that no components catch.