Engine Control Module (ECM) Diagnostic Trouble Codes - 1 Of 11

• ECM-B102400: Start Control Unit. General Failure Information. No Sub Type Information (B6304T2; 2008-2010)
  • Diagnostic Trouble Code (DTC) Information ECM-B102400
  • Fault-Tracing
    • Checking Components And Wiring
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• ECM-B102400: Start Control Unit. General Failure Information. No Sub Type Information (B6304T4; 2011-2012)
  • Diagnostic Trouble Code (DTC) Information ECM-B102400
  • Fault-Tracing
• ECM-B102400: Start Control Unit. General Failure Information. No Sub Type Information (B6324S; 2007-2010)
  • Diagnostic Trouble Code (DTC) Information ECM-B102400
  • Fault-Tracing
    • Checking Components And Wiring
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• ECM-B102400: Start Control Unit. General Failure Information. No Sub Type Information (B6324S2; 2010)
  • Diagnostic Trouble Code (DTC) Information ECM-B102400
  • Fault-Tracing
    • Checking Components And Wiring
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• ECM-B102400: Start Control Unit. General Failure Information. No Sub Type Information (B6324S4; 2011-2012)
  • Diagnostic Trouble Code (DTC) Information ECM-B102400
  • Fault-Tracing
• ECM-B102400: Start Control Unit. General Failure Information. No Sub Type Information (B6324S5; 2011-2012)
  • Diagnostic Trouble Code (DTC) Information ECM-B102400
  • Fault-Tracing
• ECM-B102482: Start Control Unit. Bus Signal / Message Failures. Alive / Sequence Counter Incorrect / Not Updated (B6304T2; 2008-2010)
  • Diagnostic Trouble Code (DTC) Information ECM-B102482
  • Fault-Tracing
• ECM-B102482: Start Control Unit. Bus Signal / Message Failures. Alive / Sequence Counter Incorrect / Not Updated (B6304T4; 2011-2012)
  • Diagnostic Trouble Code (DTC) Information ECM-B102482
  • Fault-Tracing
• ECM-B102482: Start Control Unit. Bus Signal / Message Failures. Alive / Sequence Counter Incorrect / Not Updated (B6324S; 2007-2010)
  • Diagnostic Trouble Code (DTC) Information ECM-B102482
  • Fault-Tracing
• ECM-B102482: Start Control Unit. Bus Signal / Message Failures. Alive / Sequence Counter Incorrect / Not Updated (B6324S2; 2010)
  • Diagnostic Trouble Code (DTC) Information ECM-B102482
  • Fault-Tracing
• ECM-B102482: Start Control Unit. Bus Signal / Message Failures. Alive / Sequence Counter Incorrect / Not Updated (B6324S4; 2011-2012)
  • Diagnostic Trouble Code (DTC) Information ECM-B102482
  • Fault-Tracing
• ECM-B102482: Start Control Unit. Bus Signal / Message Failures. Alive / Sequence Counter Incorrect / Not Updated (B6324S5; 2011-2012)
  • Diagnostic Trouble Code (DTC) Information ECM-B102482
  • Fault-Tracing
• ECM-B102482: Start Control Unit. Bus Signal / Message Failures. Alive / Sequence Counter Incorrect / Not Updated (B8444S; 2007-2010)
  • Diagnostic Trouble Code (DTC) Information ECM-B102482
  • Fault-Tracing
• ECM-B102486: Start Control Unit. Bus Signal / Message Failures. Signal Invalid (B6304T2; 2008-2010)
  • Diagnostic Trouble Code (DTC) Information ECM-B102486
  • Fault-Tracing
    • Information
• ECM-B102486: Start Control Unit. Bus Signal / Message Failures. Signal Invalid (B6304T4; 2012)
  • Diagnostic Trouble Code (DTC) Information ECM-B102486
  • Fault-Tracing
• ECM-B102486: Start Control Unit. Bus Signal / Message Failures. Signal Invalid (B6304T4; 2011)
  • Diagnostic Trouble Code (DTC) Information ECM-B102486
  • Fault-Tracing
• ECM-B102486: Start Control Unit. Bus Signal / Message Failures. Signal Invalid (B6324S; 2007-2010)
  • Diagnostic Trouble Code (DTC) Information ECM-B102486
  • Fault-Tracing
    • Information
• ECM-B102486: Start Control Unit. Bus Signal / Message Failures. Signal Invalid (B6324S2; 2010)
  • Diagnostic Trouble Code (DTC) Information ECM-B102486
  • Fault-Tracing
    • Information
• ECM-B102486: Start Control Unit. Bus Signal / Message Failures. Signal Invalid (B6324S4; 2012)
  • Diagnostic Trouble Code (DTC) Information ECM-B102486
  • Fault-Tracing
• ECM-B102486: Start Control Unit. Bus Signal / Message Failures. Signal Invalid (B6324S4; 2011)
  • Diagnostic Trouble Code (DTC) Information ECM-B102486
  • Fault-Tracing
• ECM-B102486: Start Control Unit. Bus Signal / Message Failures. Signal Invalid (B6324S5; 2011)
  • Diagnostic Trouble Code (DTC) Information ECM-B102486
  • Fault-Tracing
• ECM-B102486: Start Control Unit. Bus Signal / Message Failures. Signal Invalid (B6324S5; 2012)
  • Diagnostic Trouble Code (DTC) Information ECM-B102486
  • Fault-Tracing
• ECM-B102486: Start Control Unit. Bus Signal / Message Failures. Signal Invalid (B8444S; 2007-2010)
  • Diagnostic Trouble Code (DTC) Information ECM-B102486
  • Fault-Tracing
    • Information
• ECM-B108700: Lin Bus "A". General Failure Information. No Sub Type Information (B6324S2; 2010)
  • Diagnostic Trouble Code (DTC) Information ECM-B108700
  • Fault-Tracing
    • Checking Components And Wiring
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• ECM-B108700: Lin Bus "A". General Failure Information. No Sub Type Information (B6324S4; 2011-2012)
  • Diagnostic Trouble Code (DTC) Information ECM-B108700
  • Fault-Tracing
• ECM-B10A268 Crash Input. Algorithm Based Failures. Event Information (B6304T2; 2008-2009)
  • Diagnostic Trouble Code (DTC) Information ECM-B10A268
  • Fault-Tracing Information
    • Information
• ECM-B10A268 Crash Input. Algorithm Based Failures. Event Information (B6324S; 2007-2009)
  • Diagnostic Trouble Code (DTC) Information ECM-B10A268
  • Fault-Tracing Information
• ECM-B10A268 Crash Input. Algorithm Based Failures. Event Information (B6324S2; 2010)
  • Diagnostic Trouble Code (DTC) Information ECM-B10A268
  • Fault-Tracing Information
• ECM-B10A268 Crash Input. Algorithm Based Failures. Event Information (B6324S4; 2011-2012)
  • Diagnostic Trouble Code (DTC) Information ECM-B10A268
  • Fault-Tracing Information
• ECM-B10A268 Crash Input. Algorithm Based Failures. Event Information (B8444S; 2007-2009)
  • Diagnostic Trouble Code (DTC) Information ECM-B10A268
  • Fault-Tracing Information
• ECM-B10FF68 Ignition Control. Algorithm Based Failures. Event Information (B6304T2; 2008-2009)
  • Diagnostic Trouble Code (DTC) Information ECM-B10FF68
  • Fault-Tracing Information
• ECM-B10FF68 Ignition Control. Algorithm Based Failures. Event Information (B6324S; 2007-2009)
  • Diagnostic Trouble Code (DTC) Information ECM-B10FF68
  • Fault-Tracing Information
• ECM-B10FF68 Ignition Control. Algorithm Based Failures. Event Information (B6324S2; 2010)
  • Diagnostic Trouble Code (DTC) Information ECM-B10FF68
  • Fault-Tracing Information
• ECM-B10FF68 Ignition Control. Algorithm Based Failures. Event Information (B6324S4; 2011-2012)
  • Diagnostic Trouble Code (DTC) Information ECM-B10FF68
  • Fault-Tracing Information
• ECM-B10FF68 Ignition Control. Algorithm Based Failures. Event Information (B8444S; 2007-2009)
  • Diagnostic Trouble Code (DTC) Information ECM-B10FF68
  • Fault-Tracing Information
• ECM-B11D487 Low Speed Collision Mitigation By Braking Disabled. Bus Signal / Message Failures. Missing Message (B6304T2; 2010)
  • Diagnostic Trouble Code (DTC) Information ECM-B11D487
  • Fault-Tracing
• ECM-B11D487 Low Speed Collision Mitigation By Braking Disabled. Bus Signal / Message Failures. Missing Message (B6304T4; 2011-2012)
  • Diagnostic Trouble Code (DTC) Information ECM-B11D487
  • Fault-Tracing
• ECM-B11D487 Low Speed Collision Mitigation By Braking Disabled. Bus Signal / Message Failures. Missing Message (B6324S2; 2010)
  • Diagnostic Trouble Code (DTC) Information ECM-B11D487
  • Fault-Tracing
    • Information
• ECM-B11D487 Low Speed Collision Mitigation By Braking Disabled. Bus Signal / Message Failures. Missing Message (B6324S4; 2011-2012)
  • Diagnostic Trouble Code (DTC) Information ECM-B11D487
  • Fault-Tracing
• ECM-B11D487 Low Speed Collision Mitigation By Braking Disabled. Bus Signal / Message Failures. Missing Message (B6324S; 2010)
  • Diagnostic Trouble Code (DTC) Information ECM-B11D487
  • Fault-Tracing
    • Information
• ECM-B11D487 Low Speed Collision Mitigation By Braking Disabled. Bus Signal / Message Failures. Missing Message (B6324S5; 2011-2012)
  • Diagnostic Trouble Code (DTC) Information ECM-B11D487
  • Fault-Tracing
• ECM-C004082: Brake Pedal Switch "A". Bus Signal / Message Failures. Alive / Sequence Counter Incorrect / Not Updated (B6304T2; 2008-2010)
  • Diagnostic Trouble Code (DTC) Information ECM-C004082
  • Fault-Tracing
• ECM-C004082: Brake Pedal Switch "A". Bus Signal / Message Failures. Alive / Sequence Counter Incorrect / Not Updated (B6304T4; 2011-2012)
  • Diagnostic Trouble Code (DTC) Information ECM-C004082
  • Fault-Tracing
• ECM-C004082: Brake Pedal Switch "A". Bus Signal / Message Failures. Alive / Sequence Counter Incorrect / Not Updated (B6324S; 2007-2010)
  • Diagnostic Trouble Code (DTC) Information ECM-C004082
  • Fault-Tracing
• ECM-C004082: Brake Pedal Switch "A". Bus Signal / Message Failures. Alive / Sequence Counter Incorrect / Not Updated (B6324S2; 2010)
  • Diagnostic Trouble Code (DTC) Information ECM-C004082
  • Fault-Tracing
• ECM-C004082: Brake Pedal Switch "A". Bus Signal / Message Failures. Alive / Sequence Counter Incorrect / Not Updated (B6324S4; 2011-2012)
  • Diagnostic Trouble Code (DTC) Information ECM-C004082
  • Fault-Tracing
• ECM-C004082: Brake Pedal Switch "A". Bus Signal / Message Failures. Alive / Sequence Counter Incorrect / Not Updated (B6324S5; 2011-2012)
  • Diagnostic Trouble Code (DTC) Information ECM-C004082
  • Fault-Tracing
• ECM-C004082: Brake Pedal Switch "A". Bus Signal / Message Failures. Alive / Sequence Counter Incorrect / Not Updated (B8444S; 2007-2010)
  • Diagnostic Trouble Code (DTC) Information ECM-C004082
  • Fault-Tracing
• ECM-C200387: Steering Wheel Switch Left Module. Bus Signal / Message Failures. Missing Message (B6304T2; 2010)
  • Diagnostic Trouble Code (DTC) Information ECM-C200387
  • Fault-Tracing
• ECM-C200387: Steering Wheel Switch Left Module. Bus Signal / Message Failures. Missing Message (B6304T4; 2011-2012)
  • Diagnostic Trouble Code (DTC) Information ECM-C200387
  • Fault-Tracing
• ECM-C200387: Steering Wheel Switch Left Module. Bus Signal / Message Failures. Missing Message (B6324S; 2010)
  • Diagnostic Trouble Code (DTC) Information ECM-C200387
  • Fault-Tracing
• ECM-C200387: Steering Wheel Switch Left Module. Bus Signal / Message Failures. Missing Message (B6324S2; 2010)
  • Diagnostic Trouble Code (DTC) Information ECM-C200387
  • Fault-Tracing
• ECM-C200387: Steering Wheel Switch Left Module. Bus Signal / Message Failures. Missing Message (B6324S4; 2011-2012)
  • Diagnostic Trouble Code (DTC) Information ECM-C200387
  • Fault-Tracing
• ECM-C200387: Steering Wheel Switch Left Module. Bus Signal / Message Failures. Missing Message (B6324S5; 2011-2012)
  • Diagnostic Trouble Code (DTC) Information ECM-C200387
  • Fault-Tracing
• ECM-C200387: Steering Wheel Switch Left Module. Bus Signal / Message Failures. Missing Message (B8444S; 2010)
  • Diagnostic Trouble Code (DTC) Information ECM-C200387
  • Fault-Tracing
• ECM-P001100: Intake Camshaft Position Timing - Over-Advanced (Bank 1). General Failure Information. No Sub Type Information (B6304T2; 2008-2010)
  • Diagnostic Trouble Code (DTC) Information ECM-P001100
  • Fault-Tracing
    • Checking Components
    • Information
      • Fault-Tracing Information
    • Verification
      • Verification, Part 1
      • Verification, Part 2
• ECM-P001100: Intake Camshaft Position Timing - Over-Advanced (Bank 1). General Failure Information. No Sub Type Information (B6304T4; 2011-2012)
  • Diagnostic Trouble Code (DTC) Information ECM-P001100
  • Fault-Tracing
• ECM-P001100: Intake Camshaft Position Timing - Over-Advanced (Bank 1). General Failure Information. No Sub Type Information (B6324S; 2007-2010)
  • Diagnostic Trouble Code (DTC) Information ECM-P001100
  • Fault-Tracing
    • Checking Components
    • Information
      • Fault-Tracing Information
    • Verification
      • Verification, Part 1
      • Verification, Part 2
• ECM-P001100: Intake Camshaft Position Timing - Over-Advanced (Bank 1). General Failure Information. No Sub Type Information (B6324S2; 2010)
  • Diagnostic Trouble Code (DTC) Information ECM-P001100
  • Fault-Tracing
    • Checking Components
    • Information
      • Fault-Tracing Information
    • Verification
      • Verification, Part 1
      • Verification, Part 2
• ECM-P001100: Intake Camshaft Position Timing - Over-Advanced (Bank 1). General Failure Information. No Sub Type Information (B6324S4; 2011-2012)
  • Diagnostic Trouble Code (DTC) Information ECM-P001100
  • Fault-Tracing
• ECM-P001100: Intake Camshaft Position Timing - Over-Advanced (Bank 1). General Failure Information. No Sub Type Information (B6324S5; 2011-2012)
  • Diagnostic Trouble Code (DTC) Information ECM-P001100
  • Fault-Tracing
• ECM-P001100: Intake Camshaft Position Timing - Over-Advanced (Bank 1). General Failure Information. No Sub Type Information (B8444S; 2007-2010)
  • Diagnostic Trouble Code (DTC) Information
  • Fault-Tracing
    • Checking Components
    • Information
      • Fault-Tracing Information
    • Verification
      • Verification, Part 1
      • Verification, Part 2
• ECM-P001200: Intake Camshaft Position Timing - Over-Retarded (Bank 1). General Failure Information. No Sub Type Information (B6304T2; 2008-2010)
  • Diagnostic Trouble Code (DTC) Information ECM-P001200
  • Fault-Tracing
    • Checking Components
    • Information
      • Fault-Tracing Information
    • Verification
      • Verification, Part 1
      • Verification, Part 2
• ECM-P001200: Intake Camshaft Position Timing - Over-Retarded (Bank 1). General Failure Information. No Sub Type Information (B6304T4; 2011-2012)
  • Diagnostic Trouble Code (DTC) Information ECM-P001200
  • Fault-Tracing
• ECM-P001200: Intake Camshaft Position Timing - Over-Retarded (Bank 1). General Failure Information. No Sub Type Information (B6324S; 2007-2010)
  • Diagnostic Trouble Code (DTC) Information ECM-P001200
  • Fault-Tracing
    • Checking Components
    • Information
      • Fault-Tracing Information
    • Verification
      • Verification, Part 1
      • Verification, Part 2
• ECM-P001200: Intake Camshaft Position Timing - Over-Retarded (Bank 1). General Failure Information. No Sub Type Information (B6324S2; 2010)
  • Diagnostic Trouble Code (DTC) Information ECM-P001200
  • Fault-Tracing
    • Checking Components
    • Information
      • Fault-Tracing Information
    • Verification
      • Verification, Part 1
      • Verification, Part 2
• ECM-P001200: Intake Camshaft Position Timing - Over-Retarded (Bank 1). General Failure Information. No Sub Type Information (B6324S4; 2011-2012)
  • Diagnostic Trouble Code (DTC) Information ECM-P001200
  • Fault-Tracing
• ECM-P001200: Intake Camshaft Position Timing - Over-Retarded (Bank 1). General Failure Information. No Sub Type Information (B6324S5; 2011-2012)
  • Diagnostic Trouble Code (DTC) Information ECM-P001200
  • Fault-Tracing
• ECM-P001200: Intake Camshaft Position Timing - Over-Retarded (Bank 1). General Failure Information. No Sub Type Information (B8444S; 2007-2010)
  • Diagnostic Trouble Code (DTC) Information
  • Fault-Tracing
    • Checking Components
    • Information
      • Fault-Tracing Information
    • Verification
      • Verification, Part 1
      • Verification, Part 2
• ECM-P001268: Intake Camshaft Position Timing - Over-Retarded (Bank 1). Algorithm Based Failures. Event Information (B6304T2; 2008-2009)
  • Diagnostic Trouble Code (DTC) Information ECM-P001268
  • Fault-Tracing Information
• ECM-P001268: Intake Camshaft Position Timing - Over-Retarded (Bank 1). Algorithm Based Failures. Event Information (B6324S; 2007-2009)
  • Diagnostic Trouble Code (DTC) Information ECM-P001268
  • Fault-Tracing Information
• ECM-P001268: Intake Camshaft Position Timing - Over-Retarded (Bank 1). Algorithm Based Failures. Event Information (B8444S; 2007-2009)
  • Diagnostic Trouble Code (DTC) Information ECM-P001268
  • Fault-Tracing Information
• ECM-P001268: Intake Camshaft Position Timing - Over-Retarded (Bank 1). Algorithm Based Failures. Event Information (B6324S2; 2010)
  • Diagnostic Trouble Code (DTC) Information ECM-P001268
  • Fault-Tracing Information
• ECM-P001268: Intake Camshaft Position Timing - Over-Retarded (Bank 1). Algorithm Based Failures. Event Information (B6324S4; 2011-2012)
  • Diagnostic Trouble Code (DTC) Information ECM-P001268
  • Fault-Tracing Information
• ECM-P001400: Exhaust Camshaft Position Timing - Over-Advanced (Bank 1). General Failure Information. No Sub Type Information (B8444S; 2007-2010)
  • Diagnostic Trouble Code (DTC) Information
  • Fault-Tracing
    • Checking Components
    • Information
      • Fault-Tracing Information
    • Verification
      • Verification, Part 1
      • Verification, Part 2
• ECM-P001500: Exhaust Camshaft Position Timing - Over-Retarded (Bank 1). General Failure Information. No Sub Type Information (B8444S; 2007-2010)
  • Diagnostic Trouble Code (DTC) Information
  • Fault-Tracing
    • Checking Components
    • Information
      • Fault-Tracing Information
    • Verification
      • Verification, Part 1
      • Verification, Part 2
• ECM-P001568: Exhaust Camshaft Position Timing - Over-Retarded (Bank 1). Algorithm Based Failures. Event Information (B8444S; 2007-2009)
  • Diagnostic Trouble Code (DTC) Information ECM-P001568
  • Fault-Tracing Information
• ECM-P001600: Crankshaft Position - Camshaft Position Correlation - Bank 1 Sensor A. General Failure Information. No Sub Type Information (B6304T2; 2008-2009)
  • Diagnostic Trouble Code (DTC) Information
  • Fault-Tracing
    • Checking The Status
    • Checking Components
    • Information
      • Fault-Tracing Information
    • Verification
      • Verification, Part 1
      • Verification, Part 2
• ECM-P001600: Crankshaft Position - Camshaft Position Correlation - Bank 1 Sensor A. General Failure Information. No Sub Type Information (B6324S; 2007-2009)
  • Diagnostic Trouble Code (DTC) Information
  • Fault-Tracing
    • Checking The Status
    • Checking Components
    • Information
      • Fault-Tracing Information
    • Verification
      • Verification, Part 1
      • Verification, Part 2
• ECM-P001600: Crankshaft Position - Camshaft Position Correlation - Bank 1 Sensor A. General Failure Information. No Sub Type Information (B8444S; 2008-2009)
  • Diagnostic Trouble Code (DTC) Information
  • Fault-Tracing
    • Checking The Status
    • Checking Components
    • Information
      • Fault-Tracing Information
    • Verification
      • Verification, Part 1
      • Verification, Part 2
• ECM-P001600: Crankshaft Position - Camshaft Position Correlation - Bank 1 Sensor A. General Failure Information. No Sub Type Information (B8444S; 2007)
  • Diagnostic Trouble Code (DTC) Information
  • Fault-Tracing
    • Checking The Status
    • Checking Components
    • Information
      • Fault-Tracing Information
    • Verification
      • Verification, Part 1
      • Verification, Part 2
• ECM-P001621: Crankshaft Position - Camshaft Position Correlation - Bank 1 Sensor A. General Signal Failures. Signal Too Low (B6304T2; 2010)
  • Diagnostic Trouble Code (DTC) Information
  • Fault-Tracing
• ECM-P001621: Crankshaft Position - Camshaft Position Correlation - Bank 1 Sensor A. General Signal Failures. Signal Too Low (B6304T4; 2011-2012)
  • Diagnostic Trouble Code (DTC) Information
  • Fault-Tracing
• ECM-P001621: Crankshaft Position - Camshaft Position Correlation - Bank 1 Sensor A. General Signal Failures. Signal Too Low (B6324S; 2010)
  • Diagnostic Trouble Code (DTC) Information
  • Fault-Tracing
• ECM-P001621: Crankshaft Position - Camshaft Position Correlation - Bank 1 Sensor A. General Signal Failures. Signal Too Low (B6324S2; 2010)
  • Diagnostic Trouble Code (DTC) Information ECM-P001621
  • Fault-Tracing
    • Checking The Status
    • Checking Components
    • Information
      • Fault-Tracing Information
    • Verification
      • Verification, Part 1
      • Verification, Part 2
• ECM-P001621: Crankshaft Position - Camshaft Position Correlation - Bank 1 Sensor A. General Signal Failures. Signal Too Low (B6324S4; 2011-2012)
  • Diagnostic Trouble Code (DTC) Information ECM-P001621
  • Fault-Tracing
• ECM-P001621: Crankshaft Position - Camshaft Position Correlation - Bank 1 Sensor A. General Signal Failures. Signal Too Low (B6324S5; 2011-2012)
  • Diagnostic Trouble Code (DTC) Information
  • Fault-Tracing
• ECM-P001621: Crankshaft Position - Camshaft Position Correlation - Bank 1 Sensor A. General Signal Failures. Signal Too Low (B8444S; 2010)
  • Diagnostic Trouble Code (DTC) Information
  • Fault-Tracing
• ECM-P001622: Crankshaft Position - Camshaft Position Correlation - Bank 1 Sensor A. General Signal Failures. Signal Too High (B6324S2; 2010)
  • Diagnostic Trouble Code (DTC) Information ECM-P001622
  • Fault-Tracing
• ECM-P001622: Crankshaft Position - Camshaft Position Correlation - Bank 1 Sensor A. General Signal Failures. Signal Too High (B6324S4; 2011-2012)
  • Diagnostic Trouble Code (DTC) Information ECM-P001622
  • Fault-Tracing
• ECM-P001692: Crankshaft Position - Camshaft Position Correlation - Bank 1 Sensor A. Component Failures. Performance Or Incorrect Operation (B6304T2; 2010)
  • Diagnostic Trouble Code (DTC) Information ECM-P001692
  • Fault-Tracing
    • Checking The Status
    • Checking Components
    • Information
      • Fault-Tracing Information
    • Verification
      • Verification, Part 1
      • Verification, Part 2
• ECM-P001692: Crankshaft Position - Camshaft Position Correlation - Bank 1 Sensor A. Component Failures. Performance Or Incorrect Operation (B6304T4; 2011-2012)
  • Diagnostic Trouble Code (DTC) Information ECM-P001692
  • Fault-Tracing
• ECM-P001692: Crankshaft Position - Camshaft Position Correlation - Bank 1 Sensor A. Component Failures. Performance Or Incorrect Operation (B6324S; 2010)
  • Diagnostic Trouble Code (DTC) Information ECM-P001692
  • Fault-Tracing
    • Checking The Status
    • Checking Components
    • Information
      • Fault-Tracing Information
    • Verification
      • Verification, Part 1
      • Verification, Part 2
• ECM-P001692: Crankshaft Position - Camshaft Position Correlation - Bank 1 Sensor A. Component Failures. Performance Or Incorrect Operation (B6324S2; 2010)
  • Diagnostic Trouble Code (DTC) Information ECM-P001692
  • Fault-Tracing
    • Checking The Status
    • Checking Components
    • Information
      • Fault-Tracing Information
    • Verification
      • Verification, Part 1
      • Verification, Part 2
• ECM-P001692: Crankshaft Position - Camshaft Position Correlation - Bank 1 Sensor A. Component Failures. Performance Or Incorrect Operation (B6324S4; 2011-2012)
  • Diagnostic Trouble Code (DTC) Information ECM-P001692
  • Fault-Tracing
• ECM-P001692: Crankshaft Position - Camshaft Position Correlation - Bank 1 Sensor A. Component Failures. Performance Or Incorrect Operation (B6324S5; 2011-2012)
  • Diagnostic Trouble Code (DTC) Information ECM-P001692
  • Fault-Tracing
• ECM-P001700: Crankshaft Position - Camshaft Position Correlation - Bank 1 Sensor B. General Failure Information. No Sub Type Information (B8444S; 2007)
  • Diagnostic Trouble Code (DTC) Information
  • Fault-Tracing
    • Checking The Status
    • Checking Components
    • Information
      • Fault-Tracing Information
    • Verification
      • Verification, Part 1
      • Verification, Part 2
• ECM-P001700: Crankshaft Position - Camshaft Position Correlation - Bank 1 Sensor B. General Failure Information. No Sub Type Information (B8444S; 2008-2009)
  • Diagnostic Trouble Code (DTC) Information
  • Fault-Tracing
    • Checking The Status
    • Checking Components
    • Information
      • Fault-Tracing Information
    • Verification
      • Verification, Part 1
      • Verification, Part 2
• ECM-P001721: Crankshaft Position - Camshaft Position Correlation - Bank 1 Sensor B. General Signal Failures. Signal Too Low (B8444S; 2010)
  • Diagnostic Trouble Code (DTC) Information
  • Fault-Tracing
• ECM-P001800: Crankshaft Position - Camshaft Position Correlation - Bank 2 Sensor A. General Failure Information. No Sub Type Information (B6304T2; 2008-2009)
  • Diagnostic Trouble Code (DTC) Information ECM-P001800
  • Fault-Tracing
• ECM-P001800: Crankshaft Position - Camshaft Position Correlation - Bank 2 Sensor A. General Failure Information. No Sub Type Information (B6324S; 2007-2009)
  • Diagnostic Trouble Code (DTC) Information ECM-P001800
  • Fault-Tracing
• ECM-P001800: Crankshaft Position - Camshaft Position Correlation - Bank 2 Sensor A. General Failure Information. No Sub Type Information (B8444S; 2007)
  • Diagnostic Trouble Code (DTC) Information
  • Fault-Tracing
    • Checking The Status
    • Checking Components
    • Information
      • Fault-Tracing Information
    • Verification
      • Verification, Part 1
      • Verification, Part 2
• ECM-P001800: Crankshaft Position - Camshaft Position Correlation - Bank 2 Sensor A. General Failure Information. No Sub Type Information (B8444S; 2008-2009)
  • Diagnostic Trouble Code (DTC) Information
  • Fault-Tracing
    • Checking The Status
    • Checking Components
    • Information
      • Fault-Tracing Information
    • Verification
      • Verification, Part 1
      • Verification, Part 2
• ECM-P001821: Crankshaft Position - Camshaft Position Correlation - Bank 2 Sensor A. General Signal Failures. Signal Too Low (B8444S; 2010)
  • Diagnostic Trouble Code (DTC) Information
  • Fault-Tracing
• ECM-P001900: Crankshaft Position - Camshaft Position Correlation - Bank 2 Sensor B. General Failure Information. No Sub Type Information (B8444S; 2007)
  • Diagnostic Trouble Code (DTC) Information
  • Fault-Tracing
    • Checking The Status
    • Checking Components
    • Information
      • Fault-Tracing Information
    • Verification
      • Verification, Part 1
      • Verification, Part 2
• ECM-P001900: Crankshaft Position - Camshaft Position Correlation - Bank 2 Sensor B. General Failure Information. No Sub Type Information (B8444S; 2008-2009)
  • Diagnostic Trouble Code (DTC) Information
  • Fault-Tracing
    • Checking The Status
    • Checking Components
    • Information
      • Fault-Tracing Information
    • Verification
      • Verification, Part 1
      • Verification, Part 2
• ECM-P001921: Crankshaft Position - Camshaft Position Correlation - Bank 2 Sensor B. General Signal Failures. Signal Too Low (B8444S; 2010)
  • Diagnostic Trouble Code (DTC) Information
  • Fault-Tracing
• ECM-P001A00 Intake (A) Cam Profile Control Circuit / Open (Bank 1). General Failure Information. No Sub Type Information (B6324S; 2007-2010)
  • Diagnostic Trouble Code (DTC) Information
  • Fault-Tracing
    • Fault-Tracing Information
    • Verification
    • Information
      • Fault-Tracing Information
• ECM-P001A00 Intake (A) Cam Profile Control Circuit / Open (Bank 1). General Failure Information. No Sub Type Information (B6324S5; 2011-2012)
  • Diagnostic Trouble Code (DTC) Information
  • Fault-Tracing
• ECM-P001B00 Intake (A) Cam Profile Control Circuit Low (Bank 1). General Failure Information. No Sub Type Information (B6324S; 2007-2010)
  • Diagnostic Trouble Code (DTC) Information
  • Fault-Tracing
• ECM-P001B00 Intake (A) Cam Profile Control Circuit Low (Bank 1). General Failure Information. No Sub Type Information (B6324S5; 2011-2012)
  • Diagnostic Trouble Code (DTC) Information
  • Fault-Tracing
• ECM-P001C00 Intake (A) Cam Profile Control Circuit High (Bank 1). General Failure Information. No Sub Type Information (B6324S; 2007-2010)
  • Diagnostic Trouble Code (DTC) Information
  • Fault-Tracing
• ECM-P001C00 Intake (A) Cam Profile Control Circuit High (Bank 1). General Failure Information. No Sub Type Information (B6324S5; 2011-2012)
  • Diagnostic Trouble Code (DTC) Information
  • Fault-Tracing
• ECM-P002100: Intake Camshaft Position Timing - Over-Advanced (Bank 2). General Failure Information. No Sub Type Information (B8444S; 2007-2010)
  • Diagnostic Trouble Code (DTC) Information
  • Fault-Tracing
    • Checking Components
    • Information
      • Fault-Tracing Information
    • Verification
      • Verification, Part 1
      • Verification, Part 2
• ECM-P002200: Intake Camshaft Position Timing - Over-Retarded (Bank 2). General Failure Information. No Sub Type Information (B8444S; 2007-2010)
  • Diagnostic Trouble Code (DTC) Information
  • Fault-Tracing
    • Checking Components
    • Information
      • Fault-Tracing Information
    • Verification
      • Verification, Part 1
      • Verification, Part 2
• ECM-P002268: Intake Camshaft Position Timing - Over-Retarded (Bank 2). Algorithm Based Failures. Event Information (B8444S; 2007-2009)
  • Diagnostic Trouble Code (DTC) Information ECM-P002268
  • Fault-Tracing Information
• ECM-P002400: Exhaust Camshaft Position Timing - Over-Advanced (Bank 2). General Failure Information. No Sub Type Information (B8444S; 2007-2010)
  • Diagnostic Trouble Code (DTC) Information
  • Fault-Tracing
    • Checking Components
    • Information
      • Fault-Tracing Information
    • Verification
      • Verification, Part 1
      • Verification, Part 2
• ECM-P002500: Exhaust Camshaft Position Timing - Over-Retarded (Bank 2). General Failure Information. No Sub Type Information (B8444S; 2007-2010)
  • Diagnostic Trouble Code (DTC) Information
  • Fault-Tracing
    • Checking Components
    • Information
      • Fault-Tracing Information
    • Verification
      • Verification, Part 1
      • Verification, Part 2
• ECM-P002568: Exhaust Camshaft Position Timing - Over-Retarded (Bank 2). Algorithm Based Failures. Event Information (B8444S; 2007-2009)
  • Diagnostic Trouble Code (DTC) Information ECM-P002568
  • Fault-Tracing Information
• ECM-P003100: Ho2S Heater Control Circuit Low (Bank 1, Sensor 1). General Failure Information. No Sub Type Information (B6304T2; 2008-2010)
  • Diagnostic Trouble Code (DTC) Information ECM-P003100
  • Fault-Tracing
    • Fault-Tracing Information
    • Verification
    • Information
      • Fault-Tracing Information
• ECM-P003100: Ho2S Heater Control Circuit Low (Bank 1, Sensor 1). General Failure Information. No Sub Type Information (B6304T4; 2011-2012)
  • Diagnostic Trouble Code (DTC) Information ECM-P003100
  • Fault-Tracing
• ECM-P003100: Ho2S Heater Control Circuit Low (Bank 1, Sensor 1). General Failure Information. No Sub Type Information (B6324S; 2007-2010)
  • Diagnostic Trouble Code (DTC) Information ECM-P003100
  • Fault-Tracing
    • Fault-Tracing Information
    • Verification
    • Information
      • Fault-Tracing Information
• ECM-P003100: Ho2S Heater Control Circuit Low (Bank 1, Sensor 1). General Failure Information. No Sub Type Information (B6324S2; 2010)
  • Diagnostic Trouble Code (DTC) Information ECM-P003100
  • Fault-Tracing
    • Fault-Tracing Information
    • Verification
    • Information
      • Fault-Tracing Information