Programming Remote Keys

Remote keys can be added and erased. When programming remote keys for a vehicle, the transponder and remote control are programmed at the same time. A maximum of 6 transponder IDs and their remote control keys can be programmed into the vehicle. The transponder and remote control IDs are stored in the central electronic module (CEM) in cars without the keyless locking system.

In cars with the keyless locking system, only the transponder ID is stored in the central electronic module (CEM). ID of the keyless function is stored in the keyless vehicle module (KVM) and also saved in the Central electronic module (CEM).

The erase function is used when the customer wishes to prevent one or more remote keys from being used to start the vehicle. The remote keys may have been stolen and could be traced back to the vehicle.

Remote keys are programmed via the Software Manager.