Engine Control Module (ECM) - Description Of Frozen Values And Behaviors
- Engine Electrical
- Description Of Behaviors, ECM-9A0B
- Description Of Frozen Values, Engine Control Module (B5254T7; 2008-2013)
- Explanation
- Ignition Switch (Via Can):
- Brake Pedal (Via Can) (%)
- Engine Speed (Rpm)
- Boost Pressure (HPA)
- Air Mass (Kg/H)
- Engine Temperature (°C)
- Engine Temperature, Start (°C)
- Fuel Pressure (Pa)
- Fuel Temperature (°C)
- Calculated Load (%)
- Speed (Km/H)
- Ignition Angle (°BTDC)
- Ignition Retardation, Knocking (Ca)
- Atmospheric Pressure (Pa)
- Outside Temperature (°C)
- Intake Air Temperature (°C)
- EVAP Valve (%)
- Throttle Angle (%)
- Accelerator Pedal Position Sensor, PWM (%)
- Accelerator Pedal Position Sensor, Analog (%)
- Throttle Angle, Desired Value (%)
- Fuel Trim, Rapid Adjustment, Bank X (%)
- Fuel Trim, Slow Adjustment, Bank X (%)
- Front Heated Oxygen Sensor, Bank 1 (^)
- Power Supply, Engine Control Module (ECM) (V)
- Intake Values, Opening Angle (Ca)
- Exhaust Valves, Closing Angles (Ca)
- Time After Engine Start (S)
- Description Of Frozen Values, Engine Control Module (B5244S4; 2008-2010)