Installing The Engine Control Module (ECM)
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2014 Volvo XC90, 2013 Volvo XC90, 2012 Volvo XC90, 2011 Volvo XC90, and 2010 Volvo XC90. However, it is still accessible from the selected car via links, so may be relevant.
- Check that no pins or sockets are damaged on the connector.
- Carefully press the control module down into the grooves on the inside of the control module box. Press to the limit position
- Insert tool see 9995722 around the control module.
- Move the upper section of the tool forwards as far as it will go. Pull up the tool
- Press the cover into place over the control modules
- Check that the air ducts are correctly positioned.