Description Of Programmable Parameters, Customer Adaptation
Customer settings can be made via the infotainment control module (ICM).
The parameters which can be changed are described in the table below.
| Function | Selectable values | Stored in | Remarks |
| Locking indication via the turn signal lamps | On / off | Central electronic module (CEM) | |
| Unlocking indication via the turn signal lamps | On / off | Central electronic module (CEM) | |
| Automatic locking when driving | On / off | Central electronic module (CEM) | |
| Local lighting | 30, 60 or 90 seconds | Central electronic module (CEM) | |
| Approach lights | 30, 60 or 90 seconds | Central electronic module (CEM) | |
| Unlocking | Total or 2 stage | Central electronic module (CEM) | This setting applies when unlocking using the remote key. |
| Passive unlocking | Total unlocking, all doors | Keyless vehicle module (KVM) | Only in vehicles with keyless entry systems installed. |
| Passive unlocking | One of the doors | Keyless vehicle module (KVM) | Only in vehicles with keyless entry systems installed. |
| Passive unlocking | Doors on same side | Keyless vehicle module (KVM) | Only in vehicles with keyless entry systems installed. |
| Passive unlocking | Both front doors | Keyless vehicle module (KVM) | Only in vehicles with keyless entry systems installed. |